Installation Instructions

Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
P/N 315-099639-2 PAGE 1 OF 1
INSTALLATION INSTRUCTIONS
Model FS-RD-SB/-R
SURFACE BOX
(For indoor use only in dry environment)
The FS-RD-SB/-R surface box is primarily used for surface mounting remote annunciator units
(such as FS-RD-2, etc.). The FS-RD-SB is black and the FS-RD-SB-R is red.
PARTS SUPPLIED
1 FS-RD-SB/-R Surface box
1 Installation Instruction
Step 1.) Installation is to be done by qualified personnel
who have thoroughly read and understood this
instruction sheet.
Step 2.) Disconnect BATTERY and AC prior to working on
equipment.
Step 3.) Use proper screw size (not supplied) to secure
surface box to a clean, dry, shock-free and
vibration-free surface. Consider the following when
mounting the box:
• Mounting height for visual and manual access
consideration.
• Weight and size of the unit that will use the
surface box.
• Local mounting codes.
Step 4.) Follow the installation instructions of the unit that
will use the FS-RD-SB/-R surface box.
Caution: When installing the FS-RD-SB/-R surface box,
route field wiring away from sharp projections,
corners and internal components of the unit
installed.
FS-RD-SB/-R
DIMENSIONS