Installation Instructions

Siemens Industry, Inc.
Building Technologies Division
P/N 315-035860-3
A24205-A334-B814 (Edition 3)
INTRODUCTION The Model PMI-S from Siemens Industry, Inc., is a user interface for the Siemens
E100 system. From the PMI-S the operator can acknowledge events, control the
system notification appliance circuits and reset the system. Detailed information
about the nature and location of events can also be displayed.
The PMI-S contains the site specific
program as developed in Zeus. All
system logic and supervision is provided
by the controller in the PMI-S.
The PMI-S contains a ΒΌ VGA mono-
chrome LCD, Touch Screen and LEDs for
displaying system status. An audible
sounds when there are unacknowl-
edged events on the PMI-S. The display
is surrounded by keys that are used to
control the displayed information and to
navigate through these screens. Keys
are also provided to obtain help and to
enter into the menu features of the
PMI-S. (Refer to Figure 1.)
On the back of the PMI-S there are
additional diagnostic displays to aid in
system troubleshooting. This is also
where the PMI-S address is set and
where the connection is made to Zeus
for programming. (Refer to Figure 2.)
A contrast pot is provided on the back
of the PMI-S to adjust the LCD for the
best visibility.
Figure 1
PMI-S User Interface
INFO
?
+
_
....
10:32:05 04/15/01
SYSTEM STATUS: NORMAL
FireFinder-XLS
Siemens - Fire Safety
CPU
Person-Machine Interface (S24235-B101-A3)
Installation Instructions
Models PMI-S

Summary of content (4 pages)