Brochure

Cerberus
TM
PRO Advanced detectors with ASAtechnology
TM
– Advanced multi-criteria fire detector utilizing optical, thermal,
and optional CO sensor
– Extreme immunity to deceptive phenomena while providing
enhanced detection with the industry’s only No False Alarm
Guarantee
–
Provide redundant optical and thermal sensors for extraordinary
reliability
– Comply with NFPA 76 (Telecommunication Standard) as a
Very Early Warning Fire Detector (VEWFD) as a result of
high-sensitivity alarm capabilities
– Include a multi-purpose carbon monoxide (CO) life safety and
fire detector
– Selectable as a multi-criteria fire detector and/or a CO life safety
gas detector
–
Environmentally friendly “green” detectors, as they are RoHS-
compliant and replace the need for ionization detectors due to
forward/backward light scattering technology
– Provide multiple selectable temperature alarm thresholds,
fixed and rate-of-rise
– Solution for standard applications with average risk and moderate
potential for deceptive phenomena
– Prevents false alarms thanks to intelligent algorithms
– Thermal detector provides 7 selectable alarm thresholds, fixed
and rate-of-rise.
– Offer wide operating temperature & relative humidity (RH) range
– “Green” detectors, as they are RoHS-compliant, meeting the
standards regarding the restriction of the use of certain
hazardous substances in electrical and electronic equipment
Cerberus
TM
PRO standard detectors
Optical (photoelectric)
smoke detector
OP921
Order no.:
S54320-F4-A2
Multi-criteria
fire detector
OH921
Order no.:
S54320-F6-A2
Thermal
(heat) detector
HI921
Order no.:
S54320-F5-A2
Multi-criteria
fire detector
OOH941
Order no.:
S54320-F7-A2
Multi-criteria
fire/CO detector
OOHC941
Order no.:
S54320-F8-A2
– Are for immediate manual actuation of a fire alarm or an extinguishing process
– Direct alarm actuation by pulling down locking lever
– For indoor and outdoor applications
– For surface- and recess-mounted feed lines in easily accessible places
Manual pull stations and accessories
Single action
manual pull
station HMS-S
Order no.:
500-033200
Dual action
manual pull
station HMS-D
Order no.:
500-033400
Single action
metal manual
pull station HMS-M
Order no.:
500-033450
– Intelligently connect independent, potential-free make-or-break contacts
– Can be independently configured via a fire control panel for status or alarm messages
– Input modules monitor devices responsible for alarm inputs and confirm signals or technical states etc.
– Output modules control other equipment, such as door holders, fire dampers, smoke control systems, plant shutdown etc.
– FDCIO422 provides class A wiring and supervision
Line modules
Control point
HCP
Order no.:
500-034860
Conventional
zone module
HZM
Order no.:
500-034850
Line isolator
HLIM
Order no.:
500-033170
Input/output
module
FDCIO422
– 4 inputs, 4 outputs
– Class A and B wiring
Order no.:
S54322-F4-A1
Mini single
input interface
module HTRI-M
Order no.:
500-034000
Single input
interface module
with relay HTRI-R
Order no.:
500-033300
Dual input
interface module
HTRI-D
Order no.:
500-033360
Single input
interface module
HTRI-S
Order no.:
500-033370
Compatible with bases below
EXCEPT ADBH-11
Compatible with bases below EXCEPT ADBH-11
Compatible with bases below
EXCEPT ADBH-11
Photo/Thermal detector
HFP-11
Order no.:
500-033290
Thermal detector
HFPT-11
Order no.:
500-033380
FITS ALL BASES
Ceiling mount remote lamp
RL-HC
Order no.:
500-033230
Wall mount remote lamp
RL-HW
Order no.:
500-033310
WORKS WITH ALL DETECTORS
Detector relay base
DB2-HR
Order no.:
S54370-F12-A1
Audible base
SBGA-34
Order no.:
S54370-F13-A1
Detector base
DB-11
Order no.:
500-094151
Detector base
DB-11E
Order no.:
500-094151E
Audible base
ABHW-4B
Order no.:
S54320-F13-A1
Audible base
ABHW-4B
Order no.:
S54320-F13-A1
Ceiling mount
remote lamp RL-HC
Order no.:
500-033230
Wall mount
remote lamp RL-HW
Order no.:
500-033310
Audible base
ABHW-4S, (520Hz)
Order no.:
S54320-F14-A1
Audible base
ABHW-4S, (520Hz)
Order no.:
S54320-F14-A1
Audible base
ADBH-11
Order no.:
500-033210
Detector relay base
DB2-HR
Order no.:
S54370-F12-A1
Audible base
ADBH-11
Order no.:
500-033210
Audible base
SBGA-34
Order no.:
S54370-F13-A1
Detector base
DB-11
Order no.:
500-094151
Detector base
DB-11E
Order no.:
500-094151E
– Are connected to automatic fire
detectors that are not easily
accessible or visible
– Contain an indicator lamp unit
with one or two LEDs which will
light up when the connected
detector triggers an alarm
– Backward compatible with H-series detector
– Same footprint as existing Siemens duct housings
– Include optional remote test feature and indicator
– New, improved features include easy installation, improved operating
temperature range, and optional in-duct carbon monoxide (CO) detection
Remote indicators Air duct housings
Indicator ceiling mount
ILED-HC
Order no.:
500-048809
Remote indicator wall mount
ILED-HW
Order no.:
500-048637
Air duct housing
with relays
FDBZ492-HR
Order no.:
S54319-B23-A1
Optional water-tight
enclosure NEMA 4X
FDBZ-WT
Order no.:
S54319-B26-A1
Air duct housing
FDBZ492
Order no.:
S54319-B22-A1
H-series detectors
– Existing detectors from other fire protection systems from Siemens, such as the H-series, ccan also be placed on a detection loop with Cerberus PRO devices
Remote test lamp
FDBZ492-RTL
Order no.:
S54319-S27-A1
Weather-proof enclosure
NEMA 3R WP-2000
Order no.:
500-649714
P2
FireFinder XLS/XLSV – detectors and peripherals,
perfectly connected
FireFinder XLS/XLSV
P2
Answers for infrastructure and cities.
FireFinder XLS/XLSV
Customizable to meet your network needs. Flexible for any
application with Cerberus PRO detection.
“We are the trusted technology partner for
energy-efficient, safe and secure buildings and
infrastructure.”
Answers for infrastructure and cities.
Our world is undergoing changes that force us to think
in new ways: demographic change, urbanization, global
warming and resource shortages. Maximum efficiency
has top priority – and not only where energy is concerned.
In addition, we need to increase comfort for the well-
being of users. Also, our need for safety and security is
constantly growing. For our customers, success is defined
by how well they manage these challenges. Siemens has
the answers.
www.usa.siemens.com/fire
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
All rights reserved. Printed in USA 153-FIS-133
©2014 Siemens Industry, Inc.
Siemens Industry, Inc.
8 Fernwood Road
Florham Park, NJ 07932
Tel [phone]
Fax [phone]
Siemens 2014 XLS Planning Tool_Cerberus.indd 1 4/30/14 6:01 PM