System information

ManualsBrandsSiemens ManualsHome building and DecorFIREFINDER-XLS

Introduction

FireFinder XLS is a microprocessor based advanced life

safety system. Its 6" display and large lighted buttons

makes it the most intuitive fire alarm user interface in the

industry. Its use of the unique multiprocessor "Network"

design along with its ability to utilize both analog and

conventional detection devices make it an extremely

flexible and configurable life safety system.

The XLS is ideally suited for commercial, institutional and

industrial fire detection and notification applications. It

complies with the requirements of NFPA Standard 72 and

is listed by Underwriters Laboratories under their standard

UL-864. Underwriter's Laboratories of Canada also lists it

for fire applications under ULC-S527. It is approved by

Factory Mutual as well as CSFM and NYMEA for use in

those specific locales.

In addition to the standard fire applications, XLS is listed

by Underwriters Laboratories under the category UUKL for

smoke control. XLS can be used as a listed Fireman's

Smoke Control Station in high-rise office buildings, malls

and other large structures.

XLS is listed by UL and approved by FM for releasing

Halon 1301, Sinorix clean agent systems and pre-action or

deluge sprinkler systems. These include foam or water

applications. XLS follows the releasing requirements

specified in the NFPA 12 Standards 12A, 13 and 2001.

• Standard 2500 addressable point

capacity system

• Networkable to other FireFinder XLS

systems

• Powerful, easy-to-use programming

capabilities

• Fully Field Programmable Via Windows

Laptop Computer

• 6" Backlit LCD display

• User-friendly system interface

• Touch screen for maintenance

operations and function keys

• Global Annunciation and

Control Capability

• Multi-Language Display

• Universal AC power input - 120/

240VAC, 50/60Hz

• 12 amps of system power, expandable

to 48 amps

• Numerous Relays - alarm, trouble,

programmable…

• SureWire addressable loop technology

• Polarity insensitive detection circuits

(Patented)

• Useful diagnostic LEDs on all cards

• Supports FirePrint application specific

detection

• Security Device Monitoring

• Sprinkler Supervision

• Intelligent/Analog Detection Circuits,

style 6 (Class A) or Style 4 (Class B)

• Detector Sensitivity Readout/Printout

per NFPA 72

• Supervised Remote Printer

• 32 Character Custom messages

• Thermal Strip Printer

• Alphanumeric Pocket Pager Interface

FireFinder XLS

FireFinder XLS Fire Alarm Control Panel

6300

CATALOG NUMBER

• Multiple Command Stations

• Menu Driven Operator Commands

• 5000 Event History Logging with

On Line & Off Line Reports

• User Help Screens

• Multiple Levels of Password

Protection

• Automatic Environmental

Compensation for Smoke Detectors

• Alarm verification by Device or Zone

• Logic Controlled Output Functions

• Time Based Controlled Output

Functions

• Holiday Schedule

• City Tie/Leased Line

• Coded Outputs

• 200 notification appliance circuits

capacity

• Up to 4.0 amps (24VDC) per NAC

• Built-in strobe synchronization

protocol

• Supports Pre-Action, Deluge and

agent releasing

• Voice evacuation system optional

• Modular assembly

• NEC 760 Power Limited Circuits (UL

864 Compliant)

• Intelligent Interface to Building/

Process Management Systems

• Degrade mode operation

• Distributed Processing

• Operates as Interactive Peer with

other XLS or XLSVs in a XNET

network

• Pre-Alarm Operation

• Supports Single Person Test, “Walk Test”

• NCCG Graphics support

• UUKL Listed for Smoke Control

• UL, ULC Listed, FM, CSFM, &

NYMEA Approved

New

Summary of content (12 pages)

PAGE 1
FireFinder XLS FireFinder XLS Fire Alarm Control Panel • Standard 2500 addressable point capacity system • Networkable to other FireFinder XLS systems • Powerful, easy-to-use programming capabilities • Fully Field Programmable Via Windows Laptop Computer • 6" Backlit LCD display • User-friendly system interface • Touch screen for maintenance operations and function keys • ew Global Annunciation and N Control Capability • Multi-Language Display • Universal AC power input - 120/ 240VAC, 50/60Hz • 12 amps of
PAGE 2
Description The basic XLS control unit consists of the following subassemblies: PMI Person Machine Interface; PSC-12 Power Supply; DLC Device Loop Card; ZIC-4A Zone Indicating Card; CC-5 Card cage; ID-SP Inner Door Blank Single Plate; CAB-1, CAB-2 or CAB-3 enclosures.
PAGE 3
The NIC-C Card has diagnostic LEDs that indicate Card Fail, CAN Fail, HNET Fail, XNET Fail, Ground Fault, Loop A Fail and Loop B Fail, as well as LEDs to indicate Power, Style and Active Networks. ZIC-8B/ZIC-2C ZIC-8B/ZIC-2C The Zone Indicating Card ZIC-8B provides eight fully supervised programmable output circuits for use on the FireFinder XLS Fire Alarm Control Panel. The ZIC-8B supplies 8 Class B (Style Y) type output circuits, power limited to 2.0 amps maximum per circuit.
PAGE 4
rooms. Also, the CDC-4 can be used to upgrade Siemens conventional fire alarm panels to the FireFinder XLS system without requiring detector replacement. CRC-6 Controllable Relay Card CRC-6 Controllable Relay Card The Controllable Relay Card (Model CRC-6) is used with the FireFinder XLS Fire Alarm Control Panel. It is designed to provide auxiliary control of building functions such as door holder release, elevator capture, smoke control, lock release, etc.
PAGE 5
programmed usage. The label slides behind a clear protective membrane. One of the LED's assigned to each switch is a dual color LED used to indicate what type of signal is active. indicate Fan/Damper/Motor status: OFF (Red LED), ON (Green LED), TROUBLE(Yellow LED). Each SCM-8 and each switch is fully programmable and may be used to control speaker circuits, and awide range of general system functions such as All Call, All Evac, Warden's Page, Speaker, etc.
PAGE 6
SSD Series PSX-12 Power Supply Extender PSX-12 Power Supply Extender The PSX-12 is a high current auxiliary power supply that expands the FireFinder-XLS systems main PSC-12 power supply and battery charger with an additional 24VDC power. It is rated at 12Amps. RNI Remote Network Interface RNI Remote Network Interface The Model RNI Remote Network Interface provides a connection point for use with equipment mounted in a remote lobby enclosure on the FireFinder XLS Fire Alarm Control Panel.
PAGE 7
CCU/M Alphanumeric Pager Interface MDACT - Multi-Point Digital Alarm Communicator Transmitter MDACT - Multi-Point Digital Alarm Communicator Transmitter The Model MDACT Multi-Point Digital Alarm Communicator Transmitter is used in FireFinder XLS systems where point identification of alarm, supervisory, security and trouble events is required at Central or Remote Receiving Stations. An intelligent RS-485 communications protocol transmits all system information to the MDACT.
PAGE 8
CAB-MP Cabinet Mounting Plate CAB3 Three Row Enclosure CAB3 Three Row Enclosure The Model CAB3 is the largest single FireFinder XLS enclosure available. It can house up to three CAB-MP cabinet mounting plates in the enclosure, and three rows of inner door mounting slots. The outer door can be configured to open from either side. The CAB3 consists of the CAB3-BB back box, the CAB3-BD black inner and outer door package, three CAB-MP cabinet mounting plates, and one OD-LP lens plate.
PAGE 9
ID-MP. Up to four ID-SPs can be mounted in a single row on the inner door. Two blank plates are included in each Model ID-SP. ID-FP Inner Door Full Blank Plate The Model ID-FP is a blank plate that covers the full opening of the row on an inner door. It is used for applications requiring full dead front protection. A single full blank plate is included in the ID-FP. OD-GP Outer Door Grill Plate BCM Blank Control Module plate BCM Blank Control Module plate BCMs can be mounted on a single ID-MP.
PAGE 10
backbox. A bracket called the REMBOX2-MP can be used to mount up to four OCM-16 output control modules or SIM-16 supervised input modules. The REMBOX2-MP must be purchased separately. Approximate size of the REMBOX2 is 14-1/2" wide, 18-1/2" high and 5" deep. NCC-G - Network Color Graphics REMBOX4 Four Module Remote Enclosure REMBOX4 Four Module Remote Enclosure The REMBOX4 has space for mounting four inner door modules.
PAGE 11
Ordering Information Model Number PMI Operator Interface/ System CPU DLC Device Loop Card Description Model Number CAB2-BD Description Two-row black inner & outer door set 50 0-033090 CAB2-RD Two-row red inner & outer door set CAB3 Complete three-row black cabinet with back box, inner door, outer door, three CAB-MP mounting plates and one OD-LP lens plate 599-633764 CAB3R Complete three-row red cabinet 599-633765 CAB3-BB Three-row black back box 500-633011 CAB3-RB Three-row red back box
PAGE 12
Siemens Building Technologies Fire Safety Fire Safety 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600 FAX: (973) 593-6670 Website: www.sbt.siemens.com/fis 12/07 5M SFS-IG Printed in U.S.A.