User Manual

ManualsBrandsSiemens ManualsAdaptorsFIT-Yd

A6V11387243_en--_a Smart Infrastructure

2020

Building Products

Sinorix™

FIT-Yd

IG-01, IG-55, IG-100, IG-541, CO2, H2O Gas, FK-5-1-12, HFC-227ea

Test coupling joints

● Fast and secure connection of a test cylinder to the pilot piping of an extinguishing

installation

Product code: S54476-S199-A1

Summary of content (4 pages)

PAGE 1
Sinorix™ FIT-Yd IG-01, IG-55, IG-100, IG-541, CO2, H2O Gas, FK-5-1-12, HFC-227ea Test coupling joints ● Fast and secure connection of a test cylinder to the pilot piping of an extinguishing installation Product code: S54476-S199-A1 A6V11387243_en--_a 2020-07-07 Smart Infrastructure Building Products
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions A test coupling joint consists of a connection plug and a connection socket. The socket is connected to the pilot piping of the extinguishing installation. A discharge hose is connected to the test cylinder and screwed on the plug. The plug is then inserted in the socket to connect the test cylinder to the pilot piping. Both components should not be connected under pressure.
PAGE 3
For more information, refer to the mounting and installation documentation. Maintenance Storage ● Store in its original packaging, protected from shocks. ● Store in a clean and dry location, protected from bad weather. Inspection ● Check the good condition of the product. ● Check that the plug and the socket have been properly tightened. Re-tighten using the wrench if necessary. The frequency of the product inspection is subject to applicable local regulations.
PAGE 4
Technical data Technical data Maximum operating pressure 350 bar Fitting Female G 1/4ʺ BSP Gas IG-01, IG-100, CO2, compressed air Material Galvanized steel Seal NBR Operating temperature -25 °C to +100 °C, non-condensing Transport and storage temperature -40 °C to +100 °C, non-condensing Weight 0.