User Manual

ManualsBrandsSiemens ManualsExtinguishing - FlexiblesFLEX12-500

A6V11952594_en--_a

Smart Infrastructure

2020-02-19

Building Products

Sinorix™

FLEX12-500

CO2

Discharge hose

● 12 mm nominal diameter

● M24x1.5 end fittings with swivel nut

● 1 straight end fitting, 1 x 90° elbow end fitting

● Captive seals

Product code: S54476-B564-A1

Summary of content (5 pages)

PAGE 1
Sinorix™ FLEX12-500 CO2 Discharge hose ● 12 mm nominal diameter ● M24x1.
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions The discharge hose conveys the extinguishant from the cylinder on which it is mounted to the manifold, and the pipe network. Type summary Item Description Item Description 1 M24x1.5 straight end fitting with swivel nut 2 O-ring 3 DN12 hose 4 M24x1.5 end fitting with swivel nut, 90° elbow The hose is supplied with end caps fitted.
PAGE 3
Mounting Refer to the installation instructions for details. WARNING No changes permitted No product modifications permitted. Pre-mounting: ● Check that the hose, threads and seals are in good condition. ● Check that a seal is fitted on each thread. ● Never use a faulty hose. To mount the hose: ● Remove the end caps. ● Screw up fully the swivel nut on the fitting using a 32 mm open-end wrench. Torque: 55 Nm (±5 Nm). ● ● ● Apply tightening torques as specified.
PAGE 4
Technical data Technical data Nominal diameter 12 mm Maximum operating pressure 360 bar Burst pressure > 1080 bar Minimum bend radius 100 mm Fittings M24x1.5-90°, with swivel nut and captive seal M24x1.5, with swivel nut and captive seal Gaseous agent CO2 Materials Hose Synthetic rubber, steel Fittings Galvanized steel Operating temperature -20 °C to +50 °C, non-condensing Transport and storage temperature -40 °C to +65 °C, non-condensing Weight 0.
PAGE 5
Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies Siemens Schweiz AG Building Products Document ID A6V11952594_en--_a Edition 2020-02-19 © Siemens Switzerland Ltd, 2020 Technical specifications and availability subject to change without notice.