Sinorix™ FLEX5-BOOST IG-01, IG-55, IG-100, IG-541, CO2 Booster kit ● Booster kit for Sinorix™ gas extinguishing systems ● For use in extinguishing systems comprising a large number of cylinders ● Includes a pressurization flexible hose and 3 fittings ● For use at cylinder pressure Product code: S54476-B567-A1 A6V10438681_en--_a 2020-01-20 Smart Infrastructure Building Products
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions The FLEX5-BOOST booster kit is to be used in master cylinder-piloted systems comprising a large number of cylinders. The kit is used to boost pressure up at several places of the pilot circuit to ensure proper pilot pressure throughout the circuit. The FLEX5-BOOST booster kit must be positioned: ● every 30 cylinders, in 300 bar systems, ● every 20 cylinders, in 200 bar systems and CO2 systems.
Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
● ● ● Apply tightening torques as specified. Do not bend the hose below the specified minimum radius. Make sure that no forces (traction, shear or twisting) are applied to the hose. Maintenance Storage ● Store in its original packaging, protected from shocks. ● Store in a clean and dry location, protected from bad weather. Inspection ● Check the good condition of the product. ● Check that each fitting has been properly tightened using the appropriate wrench. Retighten if necessary.
Technical data Hose Technical data Nominal diameter 5 mm Maximum operating pressure 360 bar Burst pressure > 1 440 bar Minimum bend radius 30 mm Fittings M12x1.5 DKOL 6 Gaseous agent IG-01, IG-55, IG-100, IG-541, CO2 Materials Hose Plastic, steel Fittings Galvanized steel Operating temperature -20 °C to +50 °C, non-condensing Transport and storage temperature -40 °C to +65 °C, non-condensing Weight 0.
For comprehensive technical data, refer to the documents listed in the Product documentation section. Dimensions Dimensions in mm Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 6 Siemens Schweiz AG Building Products Document ID A6V10438681_en--_a Edition 2020-01-20 © Siemens Switzerland Ltd, 2018 Technical specifications and availability subject to change without notice.
