User Manual

ManualsBrandsSiemens ManualsFire - Panel ExtensionsFP120-Z1 power supply

A6V10416448_h_en_-- Building Technologies

2018

Control Products and Systems

Cerberus™ FIT

Power supply kit (70 W)

FP120-Z1

This standalone power supply is intended for decentralized supply to external devices.

FP120-Z1 has an integrated operating and fault indicator, and makes it possible to

forward faults via potential-free contacts.

● Output power 70 W

● Two separately fused, reactionless DC 24 V outputs, limited to 2 A in total

● Short-circuit-proof

● Current limited

● Mains voltage monitored

● Batteries monitored

● Battery charging with temperature compensation

● Uninterruptible power supply in battery operation

● Supplies other consumers (complies with EN 54 and VdS)

● AC 230 V or AC 115 V

Summary of content (8 pages)

PAGE 1
Cerberus™ FIT Power supply kit (70 W) FP120-Z1 This standalone power supply is intended for decentralized supply to external devices. FP120-Z1 has an integrated operating and fault indicator, and makes it possible to forward faults via potential-free contacts.
PAGE 2
Properties ● ● ● ● ● ● ● ● ● Integrated operating and fault indicator. Fault forwarding possible via potential-free contacts. The power supply (70 W) converts mains voltage to system voltage and charges the batteries. The DC 24 V system voltage is electrically isolated. For the supply of consumers in accordance with EN 54-4 and VdS. The output voltage is short-circuit-proof and battery charging is current-limited. Must not be connected in parallel.
PAGE 3
5 6 7 8 4 3 9 2 10 1 Installation situation FP120-Z1 Building Technologies Fire Safety 1 LED function display 6 Connection card FP120-Z1 mainboard 2 Battery 7 U-rail TS35, 122 mm long 3 Housing 8 Installation positions for input/output modules and relay modules 4 Power supply (70 W) 9 Front panel 5 Mains connection terminals 10 Cover cap Cerberus™ FIT 3 A6V10416448_h_en_-2018-10-23
PAGE 4
Components / accessories / spare parts Component Type Designation Order no.
PAGE 5
Product documentation Document ID Title A6V10393194 Power supply kit A (70 W) FP120-Z1 – Technical manual A6V10393173 Power supply kit A (70 W) FP120-Z1 – Mounting Related documents such as environmental declarations, CE declarations, etc., can be downloaded at the following Internet address: http://siemens.
PAGE 6
Notes Disposal This equipment is manufactured using materials and procedures which comply with current environmental protection standards as best as possible. More specifically, the following measures have been undertaken: ● Use of reusable materials ● Use of halogen-free plastics ● Electronic parts and synthetic materials can be separated Larger plastic parts are labeled according to ISO 11469 and ISO 1043. The plastics can be separated and recycled on this basis.
PAGE 7
Technical data Mains supply System supply output Voltage AC 97…127 V, AC 196…253 V, 50 / 60 Hz Current 0.5…1 A Power consumption Max. 90 VA Designation 'AUX 1', 'AUX 2' Voltage 2x DC 20.2…28.6 V, depending on charge and temperature Current (sum of both outputs) Battery supply output Mains fault monitoring signal Battery fault monitoring signal Connections Building Technologies Fire Safety ● Maximum output current with battery charge (Imax a) 0.
PAGE 8
Mechanical data Approvals 0786 15 Dimensions (W x H x D) 430 x 399 x 124 mm Weight 3,920 kg, without batteries Housing color ∼ RAL 9010 pure white Protection category (IEC 60529) IP 30 VdS G214130 Siemens Schweiz AG; Theilerstrasse 1a CH-6300 Zug Technical data: see doc.