Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsFP2012-U1 300W Power Supply Module, Installation Instructions

Siemens Data Sheet 9806

Smart Infrastructure – Building Products usa.siemens.com/fire

Product Overview

The 170-Watt power supply (Model FP2011-U1) and 300-Watt power supply (Model

FP2012-U1) provide primary, regulated (24VDC, nominal) power for normal operation

to Siemens ─ Fire Safety systems. Both power supplies are filtered and regulated.

Model FP2011-U1 is rated 24VDC, nominal, at 6.5 Amps, and Model FP2012-U1 is

rated 24VDC, nominal, at 11.5 Amps.

Notes: Model FP2011-U1 is used with Models FC901, FC922 and FC924 FACPs.

Model FP2012-U1 operates with Models FC922 and FC924 FACPs, as well

as with Models FV922 and FV924 IVC panels.

The 170-Watt power supply incorporates a 4.0A, non-resettable slow-blow fuse on the

primary input, and includes a built-in AC-line filter for surge and noise suppression.

Model FP2011-U1 mounts in a standard Cerberus PRO-brand enclosure, and there are

no serviceable parts to be maintained.

The 300-Watt power supply incorporates two (2) 6.3A replaceable, non-resettable

slow-blow fuses on the primary input and includes a built-in AC line filter for surge and

noise suppression. Model FP2012-U1 mounts in a Cerberus PRO-brand enclosure, and

there are no serviceable parts to be maintained.

Both power supplies are FM (#3010); FDNY (#6104) and CSFM (#7165-0067:0259)

Approved.

Cerberus® PRO

170-Watt and 300-Watt Power Supplies

Models FP2011-U1 I FP2012-U1

Architect & Engineer Specifications

 170W (Model FP2011-U1) and 300W

(Model FP2012-U1) output power to

fire-only and intelligent voice

communication (IVC) systems

▪ Model FP2011-U1 used with

various Siemens fire-alarm

control panels (FACPs)

▪ Up to 252 | 504-point

addressable FACPs or IVC

panels can obtain primary,

regulated power from 300W

power supplies, Model

FP2012-U1

 Operates with 120VAC or 240VAC

 Monitors AC-power failure and

‘brownout’ conditions

 Short-circuit or over-current

protection

 UL-recognized component

 UL 864 10th Edition / UL 1481 and

ULC-S527 Listed

 FM, CSFM and NYC Fire Department

Approved

Model

FP2012-U1

Model

FP2011-U1

Summary of content (3 pages)

PAGE 1
Cerberus® PRO 170-Watt and 300-Watt Power Supplies Models FP2011-U1 I FP2012-U1 Architect & Engineer Specifications  170W (Model FP2011-U1) and 300W (Model FP2012-U1) output power to fire-only and intelligent voice communication (IVC) systems ▪ ▪ Model FP2011-U1 used with various Siemens fire-alarm control panels (FACPs) Up to 252 | 504-point addressable FACPs or IVC panels can obtain primary, regulated power from 300W power supplies, Model FP2012-U1 Product Overview The 170-Watt power supply (Model FP2
PAGE 2
Wiring Diagrams Temperature and Humidity Range Model FN2001-U1 is UL 864 10th Edition and ULC Listed for indoor dry locations within a temperature range of 120+/-3°F (49+/-2°C) to 32+/-3°F (0+/-2°C) and a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/-2°C). Technical Data Physical Properties Input Trouble-Monitoring Signal Model FP2011-U1 No Input Voltage or Input Voltage is too low [signaling after 60 s @ earliest] Active In Event Of Dimensions: { W -x- H -x- D } 7.75” -x- 3.
PAGE 3
Electrical Ratings Model FP2011-U1 Input 120VAC or 240VAC (+10% / -15%), 50 / 60Hz @ 2.0A Max. Details for Ordering MODEL PART NUMBER PRODUCT FP2011-U1 500-450222 170-Watt Power Supply for Cerberus PRO panels FP2012-U1 S54400-Z60-A1 300-Watt Power Supply for Cerberus PRO FACPS and IVC systems OR TYPE 24VDC, nominal @ 6.5A Max. Output Maximum Current: 6.5A Filtered and regulated Model FP2012-U1 Input 120VAC or 240VAC (+10% / -15%), 50 / 60Hz @ 3.5A Max. 24VDC, nominal @ 11.5A Max.