User Manual

ManualsBrandsSiemens ManualsFire - Conventional Stand-alone PanelsFP2015-A1 power supply

Sinteso™ / Cerberus™ PRO

Power supply (70 W)

FP2015-A1

This power supply can be installed in fire control panels or in additional housing inten-

ded for this purpose. When it is used in additional housing, the power supply must be

monitored by the fire control panel.

● Output power 70W

● Short-circuit-proof

● Current limited

● Mains voltage monitored

● Batteries monitored

● Battery charging with temperature compensation

● Uninterruptible power supply in battery operation

● Supplies other consumers (complies with EN54 and VdS)

● AC230V or AC115V

A6V10367041_i_en_-- Smart Infrastructure

2021-03-01

Summary of content (6 pages)

PAGE 1
Sinteso™ / Cerberus™ PRO Power supply (70 W) FP2015-A1 This power supply can be installed in fire control panels or in additional housing intended for this purpose. When it is used in additional housing, the power supply must be monitored by the fire control panel.
PAGE 2
Properties ● ● ● ● ● ● ● The power supply (70 W) converts mains voltage to system voltage and charges the batteries. The DC 24 V system voltage is electrically isolated. For the supply of consumers in accordance with EN 54-4 and VdS. The output voltage is short-circuit-proof and battery charging is current-limited. Must not be connected in parallel. The battery charge voltage is regulated with temperature compensation. A jumper can be used to switch the mains voltage from AC 230 V to AC 115 V.
PAGE 3
Housing (Standard) FH7202-Z3 ● ● ● Empty housing (Standard), can be used for power supply (70 W) Dimensions without cover cap: W x H x D 430 x 398 x 160 mm Installable batteries: Max. 12 Ah, together with power supply (70 W) Housing (Eco) FH2001-A1 ● ● ● Empty housing (Eco), can be used for power supply (70 W) Dimensions without cover cap: W x H x D 430 x 398 x 80 mm Installable batteries: Max.
PAGE 4
Design 4 1 3 2 Fig. 1: Arranging the components, using the housing (Standard) as an example Components Designation Notes 1 FH2002-A1 Incl. U-rail, 150 mm Housing (Standard) FH7202-Z3 2 Batteries -- 7...
PAGE 5
Notes Disposal The device is considered an electronic device for disposal in accordance with the European Guidelines and may not be disposed of as domestic garbage. ● Dispose of the device through channels provided for this purpose. ● Comply with all local and currently applicable laws and regulations. ● Dispose of empty batteries in designated collection points. WARNING Connecting batteries in parallel Risk of explosion and fire ● Never switch batteries in parallel.
PAGE 6
Mains fault monitoring signal Designation 'Mains' Active in event of ● No mains voltage Signaling within 10 s Design Open collector Designation 'Battery' Active in event of ● ● Design Open collector Connections Mains supply, battery supply and monitoring signals Plug-type connections Ambient conditions Maximum height above sea level 4000 m Mechanical data Dimensions (W x H x D) 95 x 170 x 54 mm Weight 576 g VdS G213083 LPCB 126, 531 Battery fault monitoring signal Approvals Bat