Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsEC Declaration - FT2001

Sinteso™ / Cerberus™ PRO

Mimic display driver, LED ribbon cable

FT2001-A1, F50F410

FDnet/C-NET mimic display driver and LED ribbon cable for the fire detection

systems Sinteso™ FS20 and Cerberus™ PRO FS720.

● Mimic display driver for a total of 48 LED indicators (without housing)

● 2 LED ribbon cablesF50F410 with 24red LEDs can be connected

● 2control outputs for local buzzer and LED operating status display

● 2inputs for the 'Silence buzzer' and 'LED test' function buttons

● Mimic display driver can be connected via FDnet/C-NET

● For customer installation in any housing

A6V10082691_k_en_-- Smart Infrastructure

2021-10-22

Summary of content (8 pages)

PAGE 1
Sinteso™ / Cerberus™ PRO Mimic display driver, LED ribbon cable FT2001-A1, F50F410 FDnet/C-NET mimic display driver and LED ribbon cable for the fire detection systems Sinteso™ FS20 and Cerberus™ PRO FS720.
PAGE 2
Features and Functions FT2001 mimic display driver ● ● ● ● ● ● ● ● ● ● Can be connected via FDnet/C-NET Power supply via FDnet/C-NET Outputs are freely programmable 2x 24 outputs for controlling LEDs on mimic displays 3 outputs for expanded periphery 2 control outputs for local buzzer and LED operating status display 2 inputs for the 'Silence buzzer' and 'LED test' function buttons Integrated line separator External, electrically isolated AC/DC supply possible MC link connection socket for firmware update
PAGE 3
Use The mimic display driver FT2001 is mounted on a carrier plate and is designed for customer installation in any housing. The LED ribbon cable F50F140 allows the LEDs to be connected to the mimic display driver and for the LEDs to be positioned anywhere on the front panel in accordance with the building plan.
PAGE 4
Design Setup Mimic display driver FT2001 2 1 3 3 7 4 5 4 6 1 Mounting plate with mounting holes and spacer bolts 2 Connection for FDnet/C-NET and separate AC/DC supply 3 LED ribbon cable 'F50F410', 50-pin with 24 red LEDs, L = 1 m 4 Connector for the connection of 2 x LED ribbon cables F50F410 5 Connection terminal for supply and operating status LED 6 Connection terminal for expanded periphery 7 Mimic display driver FT2001-A1 4 Smart Infrastructure A6V10082691_k_en_-2021-10-22
PAGE 5
Details for ordering Smart Infrastructure Type Designation Weight Order number FT2001-A1 Mimic display driver 0.232 kg A5Q00014417 F50F140 Ribbon cable for mimic display driver FT2001-A1 0.
PAGE 6
Product documentation Document ID Title A6V101110501 FT2001A1 mimic display driver – Technical manual System documentation Document ID Title 008836 FS20 Fire Detection System - System Desription 008837 FS20 Fire detection system - Product Data 008838 Operation Manual Fire control panel / Fire terminal FC20xx / FT2040 008843 FS20 Fire detection system - Planning 009052 FS20 Fire detection system - Commissioning, Maintenance, Troubleshooting 009078 FS20 Fire detection system - Configuration
PAGE 7
Technical data FT2001-A1 FDnet/C-NET Line separator Operating voltage DC 16…33 V Max. operating current 45 mA Max. quiescent current 5 mA Max. capacitive load to ground C = 500 nF Max. capacitive load to ground with external supply C = 100 nF Line voltage: ● Nominal DC 32 V (= Vnom) ● Minimum DC 16 V (= Vmin) ● Maximum DC 33 V (= Vmax) Voltage at which the line separator opens: ● Minimum DC 7.5 V (= VSO min) ● Maximum DC 10.
PAGE 8
FT2001-A1 Ambient conditions Mechanical data Operating temperature 0…40 °C Storage temperature -20…+60 °C Air humidity ≤95 % rel. Dimensions (W x H x D) 106 x 200 45 mm Min.