User Manual

EPD - Type II
Based on ISO 14021
Designation
Product line
Siemens Schweiz AG
Building Technologies Division
Gubelstrasse 22
6301 Zug - CH
Management System since by
ISO 14001 (Environment) 20.10.1998 SQS
ISO 9001 (Quality) 22.07.1986 SQS
OHSAS 18001 (OH&S) 01.01.2011 SQS
FS20
Environmental
Product Declaration
FT2080-A1 / S54400-C120-A1
FT2080-C2 / S54400-C120-A2
Type of equipment /
Product No.
Fire terminal (touch)
Product
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
Typical energy consumption 88kWh/a
Maintenance
Fire load variant *) see below
20-PAP Corrugated fiber board Shift box 590g
Polyester, Aluminum, Polyethylene Metal shielding bag 20g
Polyethylene Plastic bags 5g
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
Q Silicone rubber Keypad variant
PVC rigid; halogenated 2x Flat cable mounting 6g
PE Design Foil 15g
PE Inscription strips variant
PA6 Switching lever variant
Steel; zinc plated Hexagon stand-off M3x18 4g
Steel; zinc plated Lens head screws M3x4 variant
steel CrNi Shielding plate 52g
Steel; zinc plated Mounting plate to display 448g
Steel stainless Carrier 645g
Steel; zinc plated 4x Screws m5x10 10g
Steel; zinc plated Lock carrier variant
CuZn; nickel plated KABA-cheese variant
CuZn; nickel plated Chuck-in rosette variant
PBT GF, Be/Cu, PVC 34pol. Ribbon cable 36g
PBT GF, Be/Cu, PVC 20pol. Ribbon cable 4g
PBT GF, Be/Cu, PVC 16pol. Ribbon cable 13g
Not necessary
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Product use
Plastics
Materials
Packaging
Others
Page 1/2