User Manual

ManualsBrandsSiemens ManualsFire - Addressable Stand-alone PanelsFTM1811-EN floor repeat

Building Technologies

Fire Safety & Security Products

FTM1811-EN Mimic Display Board

Product Manual

Characteristic

 60 outputs for LED activation

 1 dry contact output for buzzer

 2 inputs for “Buzzer silence” and “Lamp test”

 Communication with controller via FR18-BUS(CAN-Bus) (individual address)

 External 24VDC power required

 Input/output are not monitored

Application

 Max. length to controller 800m

 Max. length to LED 500m

 Max. 16 units of FTM1811 can be connected to each controller

 Configured via FC18 configuration tool

The below table shows the relationship between max. quantity of connectable

FTM1811 and the distance to controller under 24 VDC power supply:

Distance to controller

1000m

800m

600m

400m

200m

Max. quantity of FTM1811 0

Summary of content (4 pages)

PAGE 1
FTM1811-EN Mimic Display Board Product Manual Characteristic  60 outputs for LED activation  1 dry contact output for buzzer  2 inputs for “Buzzer silence” and “Lamp test”  Communication with controller via FR18-BUS(CAN-Bus) (individual address)  External 24VDC power required  Input/output are not monitored Application  Max. length to controller 800m  Max. length to LED 500m  Max.
PAGE 2
Structure Dip-switch for module address Reset key Jumper for end of line resistor Fig.1 Dip-switch: To set FTM1811 FR18-BUS(CAN-Bus) address, digit 1~5 are available for address 1~31, digit 6~8 are reserved.
PAGE 3
Installation Fig.2 Installation size for wall-mounted Fig.3 Installation size for rack-mounted Fig.4 Installation of PCB +24VDC Buzzer FTM1811 OUT -24VDC OUT KEY1 Key“Buzzer silence” KEY1 KEY2 Key“Lamp test” KEY2 RUN Indicator“Run” G INDT Indicator“Event” G L1 LED 1 L60 G ...... ...... G LED 60 Fig.5 Connection diagram 1 FTM1811 + 24V+ + _ 24V+ _ SGND G EGND + CAN+ + _ CAN+ _ Power supply SGND Earthing of housing Connect to Controller (FR18-BUS) CANCAN- Fig.
PAGE 4
Dimentions Specification 24 VDC±30% Operating voltage Operating current (quiescent) Max. current Rated output per LED Max. current per LED Operating temperature Storage temperature Humidity Communication protocol Connection terminals 100 mA 200 mA 10 mA 15 mA –3 ... +42 °C –20 ... +60 °C ≤95 % rel. FR18-BUS 1.0 ... 1.5 mm2 Details for ordering Type FTM1811-EN Part No 100838434 Beijing Siemens Cerberus Electronics Limited No.