Operating Instructions

Function diagrams
Contents: function diagrams
2-496
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 06/2011
2536 – Status word, monitoring functions 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-562
2537 – Status word, monitoring functions 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-563
2546 – Control word, faults/alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-564
2548 – Status word, faults/alarms 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-565
2634 – Sequence control - Missing enable signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-566
2.7 Setpoint channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-567
3010 – Fixed speed setpoints, binary selection (p1016 = 2) . . . . . . . . . . . . . . . . . . . . . 2-568
3011 – Fixed speed setpoints, direct selection (p1016 = 1) . . . . . . . . . . . . . . . . . . . . . 2-569
3020 – Motorized potentiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-570
3030 – Main/supplementary setpoint, setpoint scaling, jogging . . . . . . . . . . . . . . . . . . . 2-571
3040 – Direction limitation and direction reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-572
3050 – Skip frequency bands and frequency limitations . . . . . . . . . . . . . . . . . . . . . . . . 2-573
3060 – Basic ramp-function generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-574
3070 – Extended ramp-function generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-575
3080 – Ramp-function generator selection, status word, tracking . . . . . . . . . . . . . . . . . 2-576
2.8 V/f control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-577
6300 – V/f characteristic and voltage boost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-578
6310 – Resonance damping and slip compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-579
6320 – Vdc_max controller and Vdc_min controller (V/f control, PM230 / PM240) . . . . 2-580
2.9 Vector control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-581
6030 – Speed setpoint, droop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-582
6031 – Pre-control balancing, acceleration model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-583
6040 – Speed controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-584
6050 – Kp_n/Tn_n adaption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-585
6060 – Torque setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-586
6220 – Vdc_max controller and Vdc_min controller (PM230 / PM240) . . . . . . . . . . . . . 2-587
6490 – Speed control configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-588
6491 – Flux control configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-589
6630 – Upper/lower torque limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-590
6640 – Current/power/torque limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-591
6710 – Current setpoint filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-592
6714 – Iq and Id controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-593
6721 – Id setpoint (PEM, p0300 = 2xx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-594
6722 – Field weakening characteristic, Id setpoint (ASM, p0300 = 1) . . . . . . . . . . . . . . 2-595