Operating Instructions

2 Parameters

2.2 List of parameters

SINAMICS G120 CU230P-2 Control Units

420 List Manual (LH9), 04/2014, A5E33838102B AA

Description: Sets the signal source of the input quantity X of instance AVA 1 of the absolute value generator with sign evaluation.

Description: Display parameter for output quantity Y of instance AVA 1 of the absolute value generator with sign evaluation.

Description: Display parameter for signal SN that the input quantity X of instance AVA 1 of the absolute value generator with sign

evaluation is negative.

X < 0.0 => SN = 1

Description: Setting parameter for the run-time group in which instance AVA 1 of the absolute value generator with sign

evaluation is to be called.

Value: 5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance AVA 1 within the run-time group set in p20136.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

p20133 CI: AVA 1 input X / AVA 1 input X

Access level: 3 Calculated: - Data type: U32 / FloatingPoint32

Can be changed: T Scaling: PERCENT Dyn. index: -