Operating Instructions

Index
C-733
© Siemens AG 2008 - 2013 All Rights Reserved
SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013
7033
Essential service mode (ESM), 2-598
7035
Bypass, 2-599
7036
Cascade control, 2-600
7038
Energy-saving mode, 2-601
7200
Sampling times of the runtime groups,
2-603
7210
AND (AND function blocks with 4 inputs),
2-604
7212
OR (OR function blocks with 4 inputs),
2-605
7214
XOR (XOR function blocks with 4 inputs),
2-606
7216
NOT (inverter), 2-607
7220
ADD (adder with 4 inputs),
SUB (subtracter), 2-608
7222
MUL (multiplier),
DIV (divider), 2-609
7224
AVA (absolute value generator), 2-610
7225
NCM (numeric comparator), 2-611
7226
PLI (polyline scaling), 2-612
7230
MFP (pulse generator),
PCL (pulse contractor), 2-613
7232
PDE (ON delay), 2-614
7233
PDF (OFF delay), 2-615
7234
PST (pulse stretcher), 2-616
7240
RSR (RS flip-flop),
DFR (D flip-flop), 2-617
7250
BSW (binary change-over switch),
NSW (numeric change-over switch),
2-618
7260
LIM (limiter), 2-619
7262
PT1 (smoothing element), 2-620
7264
INT (integrator),
DIF (derivative-action element), 2-621
7270
LVM (double-sided limit monitor with hys-
teresis), 2-622
7950
Fixed value selection binary (p2216 = 2),
2-624
7951
Fixed value selection direct (p2216 = 1),
2-625
7954
Motorized potentiometer, 2-626
7958
Closed-loop control, 2-627
8005
Overview, signals and monitoring func-
tions, 2-629
8010
Speed signals 1, 2-630
8011
Speed signals 2, 2-631
8012
Torque signals, motor locked/stalled,
2-632
8013
Load monitoring, 2-633
8014
Thermal monitoring, power unit, 2-634
8016
Thermal monitoring, motor, 2-635
8017
Thermal motor models, 2-636
8020
Monitoring functions 1, 2-637
8050
Overview of Faults and Alarms, 2-639
8060
Fault buffer, 2-640
8065
Alarm buffer, 2-641
8070
Fault/alarm trigger word (r2129), 2-642
8075
Fa
ult/alarm configuration, 2-643
8550
Data set overview, 2-645
8560
Command data sets
(CDS), 2-646