Operating Instructions

Communication via PROFIBUS and PROFINET

3.7 Communication via PROFIBUS

Fieldbuses

Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE

3.7.2

What do you have to set for communication via PROFIBUS?

Configuring PROFIBUS communication

You require the appropriate engineering system to configure PROFIBUS communication in

the PROFIBUS master.

If required, load the GSD file of the inverter into the engineering system.

Configuring communication to the control system (Page 76)

Setting the address

Set the address of the PROFIBUS slave.

Setting the address (Page 78)

Setting the telegram

Set the telegram in the inverter as in the PROFIBUS master. Interconnect the telegrams in

the control program of the PROFIBUS master with the signals of your choosing.

PROFIDRIVE profile - Cyclic communication (Page 17)

Application examples

You can find application examples for PROFIBUS communication on the Internet:

Controlling the speed of a SINAMICS G110M/G120/G120C/G120D with S7-300/400F

via PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI

(https://support.industry.siemens.com/cs/ww/en/view/60441457)

Controlling the speed of a SINAMICS G110M / G120 (Startdrive) with S7-1500 (TO) via

PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI

(https://support.industry.siemens.com/cs/ww/en/view/78788716)