Operating Instructions

Parameters

List of parameters

1-428

SINAMICS G120 CU230P-2 Control Units List Manual (LH9), 01/2013

Description: Setting parameter for the run sequence of instance RSR 0 within the run-time group set in p20191.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source for set input S and reset input R of instance RSR 1 of the RS flipflop.

Index: [0] = Set S

[1] = Reset R

Description: Display parameter for output Q of instance RSR 1 of the RS flipflop

Description: Display parameter for inverted output QN of instance RSR 1 of the RS flipflop.

Description: Setting parameter for the run-time group in which instance RSR 1 of the RS flipflop is to be called.

Value: 1: Run-time group 1

2: Run-time group 2

3: Run-time group 3

4: Run-time group 4

5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

p20192 RSR 0 run sequence / RSR 0 RunSeq

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: T Scaling: - Dyn. index: -