User Manual

Standard Web pages
5.4 Classic quick setup
SINAMICS G120 Smart Access
32 Operating Instructions, 06/2019, A5E43332487-003
5.4
Classic quick setup
The classic quick setup is applicable to all the converters supported by SINAMICS G120
Smart Access. For G120X/G120XA converters, it is recommended to use the setup mode
(Page 38) which is specific for the G120X/G120XA converters.
The classic quick setup Web page allows you to set the following data for the connected
converter:
● Application class
● Motor data
● I/O configuration
● Important parameters
● Technological application
● Motor identification
Expanded page for classic quick setup
When you see the Expand sidebar on the far left of the classic quick setup page, click the
sidebar and an expanded quick setup page opens. You can do the following on this page:
● View the status of individual quick setup steps based on the symbols given below:
Completed step
Current step
To-be-completed step
● Go back to a completed step. Once you open a completed step, all the changes done in
subsequent steps become invalid and require new settings.