User Manual

53
Strap-on and immersion
sensors, condensation monitor
Mounting guidelines for condensation monitors
for measuring temperature and humidity
• File the contact surface bare and fill the hollow space
between the sensor and the pipe with thermal paste
to improve thermal conductivity
Strap-on and immersion sensors in floor sensors
Floor sensors for measuring floor temperature:
• Establish a direct connection between the sensor
and a temperature sensor (AQR) so that the floor
temperature is transmitted via the KNX bus
• Attach metal sleeve to floor sensor so that the
sensor is surrounded by air instead of screed
Mounting guidelines
Relative humidity
and temperature
RH %
°C