User Manual

Output devices
Binary output devices
Switching actuators/DIN rail mounted devices
100
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
2
Switch actuator
 One potential-free relay contact per output channel
 Electronics powered via an integrated power supply unit for AC 230 V
 Pushbutton for switching between bus operation and local operation
 A yellow LED indicating local operation
 1 red LED per output channel to indicate switch status
 One pushbutton per output channel to activate the output through a UM-function in local operating
mode
 Operational with an AC 230 V supply, (even with no bus voltage and faulty or not activated bus
communication)
 Choice between identical or individually parameterized outputs
 Operating mode selectable for each channel (normal operation, time switch operation)
 Adjustable switching on/off delay
 Selectable logic link (AND/OR) between two communication objects and presettable logic operator for
bus voltage return
 Possibility to add an additional night operation object per output channel for time limited activation of
output (lighting) at night
 Selectable warning signal prior to imminent switching off in form of three times short off/on switching
(flashing)
 Possibility to add one additional status indicator object per output channel, sending of status objects
on request and/or automatically after change
 Possibility to add additional object to drive the integrated 8-bit scene controller, integrated 8 bit scene
control and linking each output channel to up to 8 scenes
 Unchanged switch state for all output channels in case of power failure
 Selectable switch state after return of power for each output channel
 Integrated bus coupling units, bus connection via bus terminal or contact system to data rail, only 50%
of standard busload
 Modular installation devices for mounting on TH35 EN 60715 mounting rail
Data sheet
A6V10416608
N 567/..
Product Title
Dimension width (1 MW = 18
mm)
Stock no.
Product no.
Switch actuator, 16 x AC 230 V, 10 A
8 MW
5WG1567-1AB22
N 567/22
Load switch
 8 Floating relay contacts
 Switching contacts can also be operated manually via slide switches
 Can be inverted per output (NO contact/NC contact)
 Configurable timer mode with configurable on/off delay
 Logic operation (AND/OR) of two communication objects and adjustable start value of operation in the
event of bus voltage recovery
 Status object
 Positively driven operation
 Switching option on bus voltage failure and bus voltage recovery
 Bus-powered electronics
 Integrated bus coupling units, Bus connection via bus terminal or contact system to data rail
 Modular installation devices for mounting on TH35 EN 60715 mounting rail
Data sheet
A6V11786005
N 512..01
Product Title
Dimension width (1 MW = 18
mm)
Stock no.
Product no.
Load switch, 8 x AC 120 V / AC 277 V / AC 347 V‚ 20 A, C load (cUL
listed)
8 MW
5WG1512-1CB01
N 512C01