User Manual

Output devices
Binary output devices
Combination switching actuators
111
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
2
Switch actuator
 Rated contact voltage AC 230 V
 2 binary inputs for potential-free contacts
 20 cm long wires for connecting phase conductor, output, inputs and bus
 Output to be configured as NO or NC contact
 Selectable preferred output state at bus voltage failure and recovery
 Switching status object
 Selectable additional functions:
 On/off delay
 Time-switch
 Logic operation, function forced positioning
 Selectable function of the binary inputs:
 Acting as secondary inputs directly on the switching outputs or acting as independant binary inputs
with bus communication
 Free allocation of the functions switching, dimming, solar protection control, send value and scene
control to the inputs
 Two independent switching objects per input
 Blocking object for each input
 Separately selectable behaviour per input at bus voltage recovery
 Telegram rate limitation for both inputs
 Integrated bus coupling units, bus-powered electronics
 Enclosed bus terminal for bus connection
 Installation in a flush-mounting wall or ceiling box with Ø 60 mm
Dimension (Ø x H)
53 x 28 mm
UP 5..
Range overview UP 5..
Product Title
Stock no.
Product no.
Switching actuator 1 x AC 230 V, 16 A; 2 x binary input
5WG1511-2AB10
UP 511/10
Switch actuator 2 x AC 230 V, 6 A; 2 x binary input
5WG1562-2AB31
UP 562/31