User Manual

Input devices
Binary input devices
Combination actuators
120
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
3
Combination blind actuator, 4 x AC 230 V, 6 A, 8 x binary inputs
 8 inputs for DC or AC in the range from 12 to 230 V
 8 relay contact outputs locked in pairs against each other for controlling 4 × AC 230 V sunblind drives
 Contact rated voltage AC 230 V
 Contact rated current 6 A, p.f. = 1
 Electronics powered by a AC 230 V integrated power supply
 Device functional even without bus connection or if the bus communication fails
 Preset on delivery for direct output control for each blind button function via momentary contact
switches connected to the inputs
 Key for switching between bus and direct mode
 Button for each relay contact output, for switching the output in direct mode
 Selectable function for each input when using the ETS:
 Switching status, send binary value
 Switching on leading edge, switching Short/Long
 1-pushbutton dimming, sunblind control, group control
 1-bit/8-bit scene control
 8-bit/16-bit value leading edge, Short/Long
 16-bit floating point value leading edge, Short/Long
 Or for each pair of inputs:
 Acting directly on the corresponding outputs as blind button
 2-button dimming with stop telegram or with cyclical sending
 2-pushbutton sunblind control
 Selectable blocking of each input via a corresponding blocking object
 Sending of input objects after change
 Selectable cyclical input object sending
 Individual or shared configuration of actuator channels
 Communication objects for each blind channel for driving the sun protection into the end positions or
for stopping the procedure and adjusting the blind slats in steps
 Communication objects for setting position of slats and blinds in percentage information
 Automatic opening of the blind slats to a preconfigured nominal setting after uninterrupted driving
down of the blind from the top to the bottom end position, with integrated 1-bit scene control for
storing and calling up (reproduction) of 2 interim blind and slat settings
 Integrated 1-bit/8-bit scene control, 8 scenes can be integrated per channel
 Optional "Sun" object for integration in a sunlight tracking control system
 Differentiation between automatic and manual mode and with automatic switchover from automatic
to manual mode for the channel in question by pressing a bus button for manual control of the
corresponding sun protection
 Manual mode taking precedence over automatic position commands
 Optional central command for each device or each channel for switching the relevant channels to
automatic mode and driving the sun protection into the up or down end position
 Alarm: move to safety position, Locking in this position for as long as alarm is active
 Travel lock (e. g. for cleaning the outer shutter/blinds)
 Status objects for each channel for querying or for automatic sending of sun protection and slat
settings as a percentage value
 Optional status objects for reporting that the up or down position has been reached
 Integrated bus coupling unit, Bus connection via bus terminal or contact system to data rail
 Modular installation devices for mounting on TH35 EN 60715 mounting rail
Data sheet
A6V10416147
Rated voltage
AC 230 V
Rated current
6 A
Number of channels
4
Number of inputs potentialfree
8
Dimension width (1 MW = 18 mm)
8 MW
N 501/01
Stock no.
Product no.
5WG1501-1AB01
N 501/01