User Manual

Lighting
Dimmers
156
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
5
Universal dimmer UP 525/31, 210 VA, AC 230 V, 50 Hz (R,L,C load)
 One output for switching and dimming resistive, inductive or capacitive loads
 With semiconductor output for switching and dimming of lamps
 Rated operational voltage AC 230 V, 50/60 Hz
 Connected load 50...210 VA
 Settable switching and dimming behaviour
 Selectable mode of operation (normal mode, timer mode)
 Soft on, Soft off
 Dimming or jumping to a new dimming value
 Time-delayed switch-off when dimming below a settable dimming value
 Status objects for switching and dimming value
 Short-circuit message
 Message of a load failure
 Integrated 8-bit scene control
 Object for blocking the output
 Configurable brightness value at start and end of a blocking phase
 Adjustable behaviour of the output after bus voltage recovery
 2 binary inputs for potential-free contacts
 Selectable function of the binary inputs: acting as secondary inputs directly on the switching outputs
or acting as independant binary inputs with bus communication
 Free allocation of the functions switching, dimming, solar protection control, send value and scene
control to the inputs
 Two independent switching objects per input
 Blocking object for each input
 Separately selectable behaviour per input at bus voltage recovery
 Telegram rate limitation for both inputs
 About 20 cm long wires for connecting phase conductor, output, inputs and bus
 Bus-powered electronics
 Integrated bus coupling unit, bus connection via bus terminal
 For installation in a flush-mounting wall or ceiling box with Ø 60 mm
Data sheet
A6V10416182
Dimension (Ø x H)
53 x 28 mm
UP 525/31
Stock no.
Product no.
5WG1525-2AB31
UP 525/31