User Manual

Lighting
Switching/dimming actuators
Control output 1…10 V DC
162
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
5
Switch/dim actuator
 One relay contact per output as switching element
 Rated contact operating voltage AC 230 V
 Rated contact frequency: 50/60 Hz
 Rated contact current: 16 A
 Control voltage output DC 1-10 V per channel for controlling dimmable electronic ballasts
 Per output direct operation function on the device for switching and dimming and indication of the
switching status via LED
 Button on the device front for deactivation of the direct mode operation and LED to indicate activation
direct mode operation
 Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or
multi-core conductors, 0.5 ... 2.5 mm²
 With one phase terminal per output
 Bus-powered electronics
 Housing: plastic, color RAL 7035 (light grey), N-system
 DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
 Type of protection: IP 20
 One switching and status object per output
 One dimming and status object per output
 Selectable operation mode (normal mode, time switch mode, blinking)
 Adjustable ON- and OFF-delay, control value input object, central switching
 Two logic operation (AND/OR/NAND/NOR/EXOR/FILTER/TRIGGER)
 Adjustable dimming time for switching and dimming
 Switch an output on or off by dimming
 Configurable dimming curves
 Maximum and minimum dimming value
 Configurable sending of status objects on request, cyclically, and / or automatically after a change
 Configurable state on bus voltage failure and dimming value on bus voltage recovery
 Night mode for time-limited switching the output, i.e. the lighting, at night
 Night mode for time-limited switching the output, i.e. the lighting, at night
 Variable On period at night or time switch mode, time limit in timer switch mode, warning signal prior
to imminent switching-off
 Manual override, permanent OFF switching, forced control, locking mode
 Counting of operating hours and counting of load cycles with threshold monitoring
 Integrated 8-bit scene control and linking of each output into up to 8 scenes
 Surveillance of device function
Rated current
10 A
N 536D..1
Switch/dim actuator, 4 x AC 230 V,10 AX, 1…10 V
 DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
 all functions as N 536D..1
Data sheet
A6V11632775
Dimensions (W x H x D)
72 x 90 x 61 mm
Dimension width (1 MW = 18 mm)
6 MW
N 536D31
Stock no.
Product no.
5WG1536-1DB31
N 536D31
New Product