User Manual

Solar protection, anti-glare protection, utilization of daylight
Anti-glare/solar protection actuators
184
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
6
Shutter Blind Actuator, 1 x AC 230 V, 6 A
 Electrically interlocked relays (drive protection)
 End position detection
 Screwless terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5...2.5mm²
 Bus-powered electronics
 Integrated bus coupling units, bus connection via bus terminal
 For insertion in flush-mounting switch and socket boxes 60 mm in diameter and 60 mm deep
 Configurable behavior in the event of a bus voltage failure and recovery
 Automatic mode for sunlight tracking control
 Manual or standard mode
 Status: transmitting status per channel, status position of sun protection 8-bit, status position of slats
8-bit
 Integrated 1-/8-bit scene control
 8 scenes to be integrated per channel
 Travel lock (e. g. for cleaning the outer shutter/blinds)
 Separate raising/lowering protection
 Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active
 Individual or shared configuration of actuator channels
 Adaptation of objects and functions to drive type
 Suitable for integration in a sunlight tracking control system
 Using position data (8-bit value) travel to end position, stopping, stepwise adjustment sun protection
control (up/down) and Slat control (open/closed)
UP 520/..3
Range overview UP 520/..3
Product Title
Dimensions
(WxHxD)
[mm]
Stock no.
Product no.
Shutter Blind Actuator, 1 x AC 230 V, 6 A, with mounting frame
and BTI interface
71 x 71 x 42
5WG1520-2AB03
UP 520/03
Shutter Blind Actuator UP, 1 x AC 230 V, 6 A
50 x 50,9 x 41,3
5WG1520-2AB13
UP 520/13
RS 520/23, RL 521/23: The AP 641 room control box and AP 118 automation module box must be ordered separately. See Chapter Qu ick-
Assembly System, Room Control Box.