User Manual

Modular installation system, room control box
Junction box (UL/NEMA) devices
290
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
9
Binary Output, 2 x AC 120...277 V, 10 A (resistive load)
 2 floating relay contacts
 Rated contact frequency: 50/60 Hz
 Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
 Bus-powered electronics
 Integrated bus coupling unit, bus connection via bus terminal
 Type of protection: IP 20
 Rated contact operating voltage AC 120...277 V
 As built-in device with 1/2 inch thread connection for mounting to or in a UL/NEMA Junction Box with
feedthrough of the function wires through the 1/2 inch threaded connector
 For each output:
 Selectable operating mode (normal mode/time switch mode)
 Selectable relay mode (NO contact/NC contact)
 Status object as optional addition
 Variable On and Off delay times
 Selectable logic operation (AND/OR) of two communication objects
 Selectable switching state at bus voltage failure and recovery
 Optional addition of night mode object for time-limited switching On of the output (and hence the
illumination) at night
 Variable On period at night or time switch mode
 Selectable post-triggering of the On period (On period extension) in time switch mode
 Selectable warning signal prior to imminent switching-off by means of three-times short off and on
switching (flashing) at night or in time switch mode
 Selectable function:
 Including additional communication object for manual override of an output
 Forced control, including additional communication object for switching an output on or off in forced
mode
 Counting of operating hours and with threshold monitoring of the operating hours
 Counting of load cycles and with threshold monitoring of the load cycles
 Integrated 8-bit scene control and linking of each output into up to 8 scenes
Data sheet
A6V11786004
Dimensions (W x H x D)
70 x 90 x 44,6 mm
JB 510C23
Stock no.
Product no.
5WG1510-4CB23
JB 510C23