User Manual

Physical sensors
with KNX connection
Motion/presence
326
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
11
Presence detector / Motion detector with constant light level control
 Passive infrared detector for ceiling mounting indoors
 Optional blinding of parts of the detection area
 Adjustable sensitivity of detection
 Mixed light measurement
 Cyclical sending or sending on change of value of the measured brightness value (Lux)
 Integrated two-position controller
 Constant light level control for a main group of luminaries and up to four additional groups of
luminaries
 Lighting control configurable as fully automatic or semi-automatic
 Motion detection for three function blocks (presence detector, motion detector, and HVAC detector)
 2 per function block selectable functions (A, B) on start of the presence detection and two per function
block selectable functions (C, D) on expiration of the presence detection
 Configurable delay of 0…255 seconds between sending of function A and B respectively C and D
 Selection per function (A, B, C, D) switching On/Off, 8-bit value, selectable 8-bit value, 16-bit value,
temperature value, brightness value, 8-bit scene control
 Blocking object per function block
 Per function block configurable overshoot time, in each case configurable as a fixed time, as
switchable between two times via the bus, or settable to a value via the bus
 Parallel operation of several presence detectors (master-slave, master-master) without additional logic
module
 Integrated IR receiver and IR decoder for IR remote controls with six pairs of pushbuttons
 Functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of
a button pair
 Per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value,
16-bit value, temperature value, brightness value
 For each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop
telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control
 Blocking object for IR decoder
 Test mode for easy start-up
 LED for display of detected movements in test mode, to be configured using ETS
 Integrated bus coupling unit, bus connection via bus terminal, Power supply over the bus line
 Ceiling mounting on a flush-mounting box with 60 mm diameter and min. 40 mm depth or in a
housing for surface-mounting AP 258E01 (to be ordered separately)
 Monitoring motion range horizontal 360°, vertical approx. 105°
 Monitoring motion of an area of diameter 8 m (depending on mounting/room height)
 Programming button reachable from front
Data sheet
A6V10489482
Dimension (Ø x H)
88 x 63 mm
UP 258E22
Stock no.
Product no.
5WG1258-2EB22
UP 258E22