User Manual

Home automation system
Synco™ living
Consumption data interface WRI982
403
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
14
Consumption data interface
The consumption data interface collects consumption (meter) data and communicates these data using
KNX RF directly to the central apartment unit (QAX913 or QAX903). Meters may be connected either via
Impulse inputs or via M-Bus (wired). There is an additional interface for communication with the
Synergyr central communication device, OZW30, for the purpose system migration.
 M-Bus MiniMaster for up to 3 M-Bus meters
 2 Impulse inputs for impulse meters
 BatiBus communication to Synergyr OZW30
 KNX RF communication to QAX913 or QAX903
Data sheet
N2735
Operating voltage
AC 230 V
Frequency
50 Hz
Power consumption
7 VA
Communication
KNX RF-compatible, 868.3 MHz bidirectional (RF)
BatiBus communication to Synergyr OZW30
Indoor wireless range
30 m
Mounting
On DIN rail
or with screws
Degree of protection
IP30
Dimensions (W x H x D)
120 x 90 x 50 mm
WRI982
Stock no.
Product no.
S55621-H112
WRI982