User Manual

Home automation system
Synco™ living
Door/window contact AP 260
406
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
14
Door/window contact with battery, titanium white
 For detecting the state (closed/open) of a door or window via the reed contact integrated in the
device, with actuation of the reed contact through the supplied magnet for attachment to the moving
part of the door or window
 Connection for an external floating contact
 4 plug-in terminals for wire cross-sections (solid or finely stranded) of 0.14...0.5 mm2 for connection
of the external contact and to allow setting via a wire jumper, whether monitoring is to cover internal
contact only, external contact only, or both contacts
 KNX-RF transmitter for 868.3 MHz
 Electronics powered by a lithium battery (1/2 AA 3.6 V), with a battery service life of approx. 5 years,
with signaling of battery status every 24 hours, and with an LED that flashes every 10 seconds to
indicate that the battery needs replacing
 Commissioning using a pushbutton located on the front of the sensor – no additional aids required
 Surface mounting
 Comprising one mounting plate for screw or adhesive fastening, clip-on radio sensor with integrated
reed contact and trigger solenoid. Battery included in delivery.
Data sheet
A6V10416211
Dimensions (W x H x D)
87 x 36 x 27 mm
AP 260/11
Stock no.
Product no.
5WG3260-3AB11
AP 260/11