User Manual

Output devices
Binary output devices
Switching actuators/DIN rail mounted devices
98
Siemens Switzerland Ltd www.siemens.com/gamma 2020
Smart Infrastructure
2
Switching actuator with load current detection
 One relay contact per output as switching element with load current measurement
 Rated contact operating voltage AC 230 V
 Rated contact frequency: 50/60 Hz
 Per output with mechanical display of the switching status via slide switches, which can also be used
for direct manual operation of the switching output
 Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or
multi-core conductors, 0.5 ... 2.5 mm²
 One phase terminal per output
 Fluorescent lamp load according to DIN EN 60669: 16 AX / 20AX (200 µF) at AC 230 V
 Bus-powered electronics
 Housing: plastic, color RAL 7035 (light grey), N-system
 DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
 Type of protection: IP 20
 One switching and status object per output
 Selectable operating mode (normal mode, time switch mode, flashing mode),
 Selectable relay mode NC contact / NO contact, On and Off delay times, control value input object
 Logic operation (AND/OR/NAND/NOR/EXOR/FILTER/TRIGGER)
 Selectable sending of status objects on request, cyclically and/or after a change
 Selectable switching state on bus voltage failure and value of the switching object on bus voltage
recovery
 Night mode for time-limited switching On of the output, and hence the illumination, at night
 Variable On period at night or time switch mode, time limit in timer switch mode, warning signal prior
to imminent switching-off
 Manual override, permanent OFF switching, forced control, locking mode
 Counting of operating hours and counting of load cycles with threshold monitoring
 Measurement of load current values with threshold monitoring and monitoring of contact faults
 Integrated 8-bit scene control and linking of each output into up to 8 scenes
 Surveillance of device function
Rated current
20 A
N 535D..1
Switching actuator, 4 x AC 230 V, 16/20 AX, C-Load, Load Check
 Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)
 all functions as N 535D..1
Data sheet
A6V11252209
Dimensions (W x H x D)
72 x 55 x 90 mm
Dimension width (1 MW = 18 mm)
4 MW
N 535D31
Stock no.
Product no.
5WG1535-1DB31
N 535D31
New Product