Brochure

Heating, ventilation and air conditioning - room temperature control
Room temperature controllers with integrated sensing and operation
Flush-mounted
222
Siemens Switzerland Ltd www.siemens.com/gamma 2021
Smart Infrastructure
7
Room Control Unit, i-system
 Multifunctional display-/control panel for KNX with Dot-Matrix LCD display 96 x 128 pixels
 8 capacitive touch buttons for horizontal operation
 For the display and control of at least 10 adjustable room control functions: Switching toggle/On/Off,
Dimming, Door bell function On/Off, Solar protection control; send 1 Byte/2 Byte value; display 1 Bit/1
Byte/2 Byte value; Forced control; display text messages; warning and alarm messaging; recall and
save scenes; warning and alarm messaging
 Room control functions lockable via KNX-bus
 Green/red LED as orientation light, as status indication, as a response to pressing a button respectively
to the signalling of alarm reports
 A signaler for acoustical alarm reports respectively as a status of the touch operation
 Integrated room temperature sensor
 Evaluation and weighting of an external inside temperature sensor
 Room temperature control configurable as two-step control and/or continuous control, for exclusive
heating operation, exclusive cooling operation or heating and cooling operation
 Selectable operating modes over the KNX: Comfort, Pre-comfort, Energy-savings and protection
 Local indication
 Of the active operating modes or automatic- respectively manual mode
 Inside temperature or outside temperature
 Heating or cooling mode
 Dew point alarm
 Open window
 Local switching between
 Manual- and automatic mode
 Comfort, pre-comfort, energy-saving- and protection mode
 Adjustable time-limited extension of the comfort mode
 Adjustable room temperature setpoint shifting for comfort mode
 Via KNX set basic setpoint value of the room temperature for comfort mode
 An outside temperature based temperature setpoint value tracing in the cooling operation
 Adjustable dead zone between the heating setpoint value and the cooling setpoint value for comfort
mode
 Transmission of controller output(s) either as On/Off switching commands or as control commands in
the range 0...100 %
 Local display of the manually selected fan rotational speed respectively of the automatic adjustment of
the fan rotational speed
 Adjustable fan rotational speed respectively automatic adjustment of the fan rotational speed on the
controller
 Weekly schedule programme for controller- operating modes, automatic mode and at the least 8 room
control functions
 At the least 40 schedule tasks and Display and set of the date and time
 User control of LCD background lighting and Background color
 Display system settings and room temperature controller in the languages: German, English, French,
Italian od Spanish
 User setting of at least 3 operating languages also Integrated bus coupling unit, bus connection via
bus terminal possible
 Flush mounted device for the mounting in an flush wall box Ø 60 mm, for fixing on the mounting
plate AQR2500NF via lateral springs (separately specified)
The matching design frame must be ordered separately. See chapter Display and Operation Units -
Pushbuttons accessories.
The mounting plate AQR2500.. must be ordered separately.
Data sheet
A6V10416250
Dimensions (W x H x D)
55 x 55 x 37,2 mm
UP 227
Stock no.
Product no.
5WG1227-2AB11
UP 227