Brochure

Touchpanel Interface

‒ Full-color touchpanel – 5.7” diagonal screen

‒ Monitor and command any Gamma control point such as lighting, shading, setpoints or

values through BAS integration

‒ Create up to 20 scrollable interface pages using four templates

‒ Supports alarm monitoring, trend display, date and time display, and password protection

‒ Customize your own startup screen or up to 100 alternating slideshow images

Opticontrol – Combo Presence Detection and Light Level Sensor

‒ Brightness control sends dimming or On/Off signals to maintain a constant light level and reduces

energy usage when “free” lighting from windows is available

‒ Fully adjustable motion range, field and light sensitivity and brightness setpoints

‒ Fully configurable on-time, off-time and behavior in different scheduled periods

‒ Use an optional infrared (IR) remote to control lights and blinds and to access scenes via

the Opticontrol built-in IR receiver

Gamma Switches

‒ Available in one-pair, two-pair and four-pair

‒ Each button is configurable for different functions

‒ Software configuration – with no hard wiring – gives you flexibility to switch individual devices or groups

‒ Variants with LED indication and with IR remote control

‒ Uses any architect’s switches through separate switch interfaces

Motion Sensing/Occupancy Control

‒ Detects motion and sends switching commands

‒ Software configuration – with no hard wiring – gives you flexibility to switch individual devices or groups

‒ Fully adjustable motion range, field and light sensitivity

‒ Fully configurable on-time, off-time and behavior in different scheduled periods

Relay and Analog Dimming Outputs

‒ Switches lights or other loads through eight individually controllable 20A relays

‒ Dims up to 60 analog lighting ballasts with each of eight individually controllable analog outputs

‒ Supports manual or automatic On/Off, dimming, daylight harvesting and scene control

‒ Allows for manual overrides and delivers visualization of output status

‒ With separate DALI controller, control up to 64 DALI ballasts individually or in groups

Blind/Shading Control

‒ Blind actuator uses outputs specifically designed to detect end positions and control up to

four separate shade and blind motors

‒ Raises and lowers shades, sets positions and tilts louvers

‒ Works with motorized projection screens

‒ Utilizes manual control with switches, automatic control as part of defined scenes or

automatic control with the Weather Station

Weather Station

‒ Measures solar intensity, calculates the position of the sun and measures wind speed and air

temperature

‒ Uses weather measurements to automatically manage blinds/shading on all sides of your building

‒ Uses wind speed to protect external blinds by moving them to a defined safe position so

they will not be damaged by high winds

‒ Uses frost detection to separate the slats so they will not freeze together