Data Sheet for Product

ManualsBrandsSiemens ManualsOtherDELTA cataloge 2018/19

Technical Specification Sheet

Document No. 154-113

November 26, 2012

Siemens Industry, Inc.

Page 1 of 3

GAMMA

IP Viewer N 151

Description

The IP Viewer N 151 provides the following functions:

Incorporates a Web server for operating and

monitoring KNX systems.

Displays up to five operating pages with 40

functions through a standard browser.

Provides a Web configuration page, which allows

you to edit the display in a number of languages.

Provides an interface to KNX installations through

data networks using the Internet Protocol (IP).

Provides communication from KNX devices with

computers or other data processing devices

(KNXnet/IP Tunnelling).

Enables client software products, such as ETS 4,

which are based on the KNXnet/IP tunnel protocol,

to connect to the N151 IP Viewer.

Communicates with other devices or systems

connected to the same Internet Protocol (IP)

network.

This device is intended to be used by a network

administrator; only one user may be connected at-a-

time.

ETS (Engineering Tool Software) is used to program

the IP Viewer N 151 default settings and define data

types for the 40 functions. The following function types

are available:

No function

Switching with feedback

Switching without feedback

Feedback

Presence

Dimming

Shutter/Slat

1 byte relative (0 to 100%)

1 byte value (0 to 255)

2 bytes floating point (EIS 5/DPT 9.xxx)

4 bytes floating point (EIS 9/14.xxx)

2 bytes counter (EIS 10/7.001)

4 bytes counter (EIS 11/12.001)

Call call/program scene 1-bit

Call call/program scene 8-bit

Summary of content (3 pages)

PAGE 1
Technical Specification Sheet Document No. 154-113 November 26, 2012 GAMMA IP Viewer N 151 Description The IP Viewer N 151 provides the following functions: Incorporates a Web server for operating and monitoring KNX systems. Displays up to five operating pages with 40 functions through a standard browser. Provides a Web configuration page, which allows you to edit the display in a number of languages. Provides an interface to KNX installations through data networks using the Internet Protocol (IP).
PAGE 2
The 40 functions provided supply up to 80 communication objects for connecting to group addresses. The following global settings can be defined: Automatic refresh interval Key delay, which defines the time to detect a button or switch being held down for dimming or blind functions. The following default settings for the device can be used: Fixed IP and DHCP addressing are supported. Automatic assignment through a DHCP service allows the IP address to be changed without configuration through ETS.
PAGE 3
Specifications, Continued Control Elements One mode button: for toggling between normal operating mode and addressing mode. Display Elements One yellow LED: Ethernet Link Signal present (LK) One yellow LED: Data traffic on Ethernet (LA) One red LED: for displaying normal mode (OFF) and addressing mode (ON) Connections Bus line: Bus Terminal (red–black): 20 to 18 AWG solid copper wire (Ø 0.6 to 0.8 mm single core).