Brochure

For smart buildings
To turn rooms into perfect places,
intelligent devices are needed – like
the new presence detectors, which
combine numerous functions for a
pleasant atmosphere and maximum
energy savings in the room. The new
presence detectors capture data
concerning brightness, temperature,
humidity and CO
2
and thus control not
only the illumination systems but also
ventilation and heating systems. This
creates the optimal ambient conditions
in the room and ensures the precise
capture, monitoring and control of
energy consumption – for maximum
comfort and the highest energy
efficiency.
For higher efficiency
These presence detectors enable
efficient and intelligent light and
temperature control depending on the
use of the rooms and thus optimization
of consumption. The high-resolution
detection area enables the detection
of motion (400 m
2
) and presence
(64 m
2
) – for a higher security, energy
savings and efficiency in the room.
The product version with ultrasound
offers a detection area of 28 (presence)
to 79 m² (motion).
For more comfort
From optimal lighting at any time of
day or season depending on the room
occupancy to the control of blinds, the
presence detectors ensure the best
possible brightness conditions at all
times. The constant light control
function of the presence detectors
provides a constant lighting level that
reliably adapts even to rooms with great
spatial depth. To ensure optimal living
and working conditions, without
compromising productivity and
performance, continuous measurement
of the CO
2
concentration is essential.
The presence detectors measure and
evaluate the captured data and control
the ventilation systems such that good
air quality is assured and energy
consumption simultaneously reduced.
Easy and uncomplicated commissioning
of the device is possible via remote
control thanks to the integrated
infrared receiver. This enables the
programming and operation of the
devices without dismantling them. The
presence detectors are installed with
just one cable, minimizing installation
time and costs.
Presence Detector WIDE for
HVAC and lighting control
One room. One sensor.
Highest energy efficiency for perfect places.
siemens.de/gamma
Smart home
and building
solutions.
Global. Secure.
Connected.
Highlights
• Cost-effective and energy-saving through
up to 3 HVAC sensors and controllers in a
single device
• High-resolution detection area
• Reliable presence detection
• Optimal lighting through constant light
control
• Precise measured value evaluation
• Flexible mounting options