Brochure

All important data
at a glance
Solar protection actuators, N 543D
• For the control of drives with
AC motor for max. AC 230 V
• Contact rated current voltage
AC 230 V
• Contact rated frequency
50 / 60 Hz
• Electromechanically mutually locked
relays for rotational direction switching
• Membrane keypad for direct
operation on the devices for moving
the sun protection up/down, stop
command and slat adjustment
• 2 status LEDs per channel on the
device for display of the travel
direction and override
• Maintenance-free terminals for
connecting and looping through
solid, stranded, and fine-stranded
conductors, 0.5 to 2.5 mm
2
• 2 terminals per channel for motor
connection (up down)
• At least one phase connection
terminal for two channels each
• Operation of electronics via bus
voltage
• Integrated bus coupler, bus connection
via bus terminal block
• Red LED for displaying the activation
of address mode and readiness for
operation
• Housing Plastic; color:
RAL 7035 (light gray); N-dimension
• DIN rail-mounted device for installa-
tion on rail TH35 DIN EN 60715
• Protection type: IP 20
• Construction site function for
moving, stopping the solar protec-
tion, and changing the slat position
• Object for monitoring device
functionality
• Object for targeted call-up of status
values
Control functions
• Selectable operating mode: blind,
shutter/awning, ventilation flaps
• Per-channel motion commands: stop
solar protection and slat adjustment
• Per-channel control of element
position and slat position
• Per-channel centralized movement
of solar protection in automatic and
manual mode, and delay time for
up/down
• Distinction of manual and automatic
operation (element position and slat
position) with configurable behavior
for sunlight
• Move to/set preset position 1-4 and
8-bit scene control
• Configurable return phase and delay
times of drives
• Per-channel configurable behavior
for bus voltage failure and starting
value when bus voltage is recovered
Override functions
Configurable behavior for
override
• Wind alarm
• Rain alarm
• Frost alarm
• Lock
• Forced position
• Forced control
• Range limitation
Diagnostic functions:
Configurable sending of status objects
(direct operation, automatic mode,
element and slat position, travel,
calibration of travel time to end
positions, overrides) on request,
cyclically and/or in case of change
Shared
characteristics
Functions
per device
Type Design OC Order no. PE
(ST, SZ, M)
PKG/
VPE
PG Price
(€)
N 543D31 Solar protection actuator 4 x AC 230 V, 6 A,
with end position detection
A 5WG1543-1DB31 1 1
N 543D51 Solar protection actuator 8 x AC 230 V, 6 A,
with end position detection
A 5WG1543-1DB51 1 1