User Manual

Display and Operation Units
Multifunction devices
Technical specifications
Type Description
UP 204 Room controller Contouch
Multifunctional display/operating device for KNX,
with 320 x 240 pixel, 2.8” LCD color display
For the display and operation of at least
18 configurable room operator functions:
– Switching On/Off/Over dimming and pushbutton
function (bell function)
– Shutter/blind/roller control
– Value transmission: 1 byte in %, 1 byte integer without
prefix, 1 byte integer with prefix, 2 byte integer without
prefix, 2 byte integer with prefix, 4 byte integer without
prefix, 4 byte integer with prefix, wind speed in meters
per second, brightness in lux, temperature in °C
– Positively driven operation
– Scene control: Store and call up scene 8 bit, store and
call up scene 1 bit
– Display of text, warning and alarm indications
Operation using touch screen and/or by turning/pushing
rotary-/push button
RGB LED as orientation light or for signaling alarm
indications
Buzzer for acoustic alarm indication or as feedback
when operating touch screen
Integrated room temperature sensors
Analysis and weighting of an external inside
temperature sensor
Room temperature control can be set as a two-point
control and/or continuous-action control for heating
only, for cooling only, or for two level heating and
cooling mode
Operating modes that can be switched via KNX:
comfort mode, pre-comfort mode, energy-saving mode
and frost or heat pro-tection mode
Fan speed step can be set via the rotary-/push button or
en-tered automatically by the controller
Weekly scheduling program for controller operating
modes and for 18 room operator functions
At least 16 time switching points per function per
weekday
Selection of at least 4 different design templates as
operator and display interface
Slot for a micro SD card for transferring firmware and
config-uration data
Incl. bus coupling unit (included in delivery)
Bus connection via bus terminal
Connection of the separate 24 V DC boost voltage,
power consumption approx. 50 mA
Flush-mounting device for mounting in a Ø 60 mm
installation box, with screw fixing
Dimensions (H x W x L): 116 x 86 x 30 mm
(with rotary-/push button and contact strip channel)
Contouch Flash-Kit (Accessories)
with microSDHC card and 2 adapters for transferring firmware and configuration data.
Selection and ordering data
Type Version DT Order no.
Price
per PU
PU (UNIT,
SET, M)
PS/
P. unit
PG
Weight per
PU (kg)
UP 204
UP 204 Room controller Con-
touch
1)
incl. bus coupling unit
Type
– Titanium white
– Carbon metallic
– Aluminum metallic
– Piano black
A
A
A
A
A
5WG1 204-2AB11
5WG1 204-2AB21
5WG1 204-2AB31
5WG1 204-2AB51
1
1
1
1
1
1
1
1
A19
A19
A19
A19
0,252 kg
0,252 kg
0,252 kg
0,252 kg
Contouch Flash-Kit
1)
(Accessories)
with microSDHC card and
adapters for USB and SD
A
5WG1 204 8AB01
1 A19 0,032 kg
1)
The Contouch Flash-Kit with microSDHC-card and adapters for USB and SD must be ordered separately.