Data Sheet for Product

Technical Specification Sheet
Document No. 154-103
November 12, 2012
Siemens Industry, Inc. Page 1 of 2
GAMMA
Data Rails with Connector for
Flat DIN Rails
Description
A Data Rail 190 with a Soldered Connector may be
used instead of a Data Rail 190 without Connector
(P/N 5WG11908AB01) plus an additional Connector
REG 191/01 or REG 191/11. Data Rails 190 with
Connector are available in several lengths for insertion
in shallow DIN rails in accordance with EN 60715
(internal width 1” [25 mm], external height 0.3”
[7.5 mm] with a thickness of 0.06” [1.5 mm]).
Data rails with connector for shallow DIN rails:
Length in
Inches
(Millimeters)
Usable Module
Units
Part Number
8.4 (214) 11 5WG11908AB02
9.6 (243) 12 5WG11908AB12
10.9 (277) 13* 5WG11908AB22
12.8 (324) 17 5WG11908AB32
16.9 (428) 23 5WG11908AB42
18.3 (464) 25* 5WG11908AB52
NOTE: * If required, one less module can be used
depending on the type of Siemens
distribution board.
A connector with four pins and a four-pole bus terminal
is soldered onto the right end of the Data Rail 190 with
Connector. A cover is placed on top of the connector
to protect the individual conductors of the bus cable.
Application Programs
None