Brochure

48 49
Commissioning assistant
Remote access to KNX
via the Internet (DSL)
During the course of completing a building project or after
the building goes into operation, changes, such as the
lighting times, are often requested. Up to now this meant
making an appointment with the customer, driving to the
property, changing the parameter settings, driving back
again.
Now you can make these changes immediately and very
comfortably from your office. A LAN/Internet connection
lets you easily parameterize the installation remotely.
Most buildings already have a LAN and Internet connec-
tion. Since access is from outside the building, a VPN
DSL router or dial-up router must be used to ensure data
security.
Benefits
■
Change parameters quickly
■
Save driving time and costs
■
High data security
■
Flexibility boosts your image in the customer’s eyes
Follow these steps
■
Connect the IP interface to the KNX bus
■
Connect the IP interface to the LAN
■
Configure the VPN DSL router or dial-up router
You will need
■
An IP interface, with an additional power supply or
Power-over-Ethernet, if necessary
■
VPN DSL router or ISDN/analog dial-up router
■
ETS (Version 3 or later)
DSL router with VPN or
ISDN/analog dial-up router
Internet (via VPN connection or
dial-up modem)
KNX device
KNX device
KNX device
IP interface
DSL router or modem
KNX
LAN
LAN