Brochure

50 51
Commissioning assistant
KNX visualization
via Ethernet (LAN)
When retrieving large numbers of data points cyclically for
visualization in large projects, it can take a long time to
update the values.
Use your LAN as the main and backbone line and connect
your PC for visualization to the LAN. This makes visu-
alization up to 200 times faster ‒ and you can monitor
larger numbers of data points. You no longer need any
data concentrators, and the data volume is also no longer
important.
Remote visualization serves best for managing multiple
properties at the same time and checking parameters
as cooling temperature, fan failure or temperature and
humidity.
Follow these steps
■
Connect one IP interface to KNX for each property
■
Connect the IP interface to the LAN
■
Configure the IP interface via the Internet/intranet
for accessibility
■
Define the IP interface in the visualization or ETS
software
You will need
■
IP interface, 1x per property, with an additional
power supply or Power-over-Ethernet, if necessary
■
IPAS ComBridge Studio visualization software
■
ETS (Version 3 or later)
KNX device
KNX device
KNX device
LAN-enabled PC with visualization
IP routerIP router
LAN
(multicast-enabled)
KNX KNX