Brochure

52 53
Commissioning assistant
Monitoring properties with
KNX via Ethernet (LAN)
Some distributed properties need to be checked regularly
for certain conditions and maintained accordingly. Such
checks include the fill levels of oil tanks in distributed
apartment buildings or the operating hours of electrical
consumers.
These states can now be reported centrally to any loca-
tion, eliminating the need for cyclical inspection walk-
throughs. Instead, maintenance is carried out precisely
when needed, e.g., refilling the oil tanks. You can even
select the best time to do this, for example, when oil
prices are lowest.
Benefits
Central status messages for distributed properties
Less maintenance required
Optimization of maintenance costs
Follow these steps
Connect one IP interface to KNX for each property
Connect the IP interface to the LAN
Configure the IP interface via the Internet for
accessibility
Define the IP interface in the visualization software
You will need
IP interface, 1x per property, with an additional
power supply or Power-over-Ethernet, if necessary
IPAS ComBridge Studio visualization software
ETS (Version 3 or later)
Internet VPN
connection or
intranet/LAN
KNX device
KNX device
KNX device
Property 1
IP interface
Property 2
IP interface
Property 3
IP interface
KNX
KNX
KNX