Flyer

• 2 switching outputs to control
electro-thermal actuators for
radiator and cooling ceiling valves
• Up to 4 thermo-electric actuators
per output, with a total of up to
1.5A in switched-on mode and up
to 58W power consumption when
switching on
• Rated contact operating voltage
AC 24-230 V or DC 24V
• Electric motor rotary drive based on
KNX S-mode and without a spring
return
• Use of two operating modes, i.e.
Ø 1: Use of two separate setpoint
objects for heating/cooling in
the actuator for compatibility
with KNX room controllers and
Ø 2: Position setpoint 0...100% for
displaying the control loop in
the higher-level controller
• Energy-efficient operation
thanks to protection mode when
window is left open (including
display of cause)
• Flexibility thanks to
interchangeable setpoint setting
knob (absolute/relative),
parameter settings and
integration into building
automation and control systems
• Straightforward installation –
matching DELTA frame program
• Electric motorized, proportional
(continuous) valve actuator with
LED travel indicator and integrated
bus coupling unit for direct KNX
connection
• Supplied with valve adapter rings
suitable for Siemens and other
manufacturers
• Maximum actuating force of 120 N
• Line permanently connected to the
housing for bus connection and
two additional alarm contacts (e.g.
window contacts); connectable as
binary inputs
HVAC
Room temperature controller Valve actuator AP 562
Electromotive rotary actuator GLB/GDB
Thermal actuator RS 510K23