Fire & Security Products Cerberus D100 Multifunctional process control for company security
Danger alarm systems designed for Multifunctional economic efficiency Every company is following the trend of achieving greater economic efficiency. Concentration on clear objectives, streamlined organization and core competence areas are the tools that allow these requirements to be met.
Links Reliability – high degree of availability The fundamental basis of process control is A danger alarm system is responsible for the potential to create logical, complex links providing security in a company and for this from all of the information that is available to exact reason it must possess an extremely a system and to trigger the relevant controls high level of security itself. Cerberus D100 based on these links. has been designed with this in mind.
Networking Groundbreaking operation Operation is a key function of all process controls. This applies, in particular, to danger alarm systems that have to cope with the high stress load of users in a danger situation. New ground has been broken with the Cerberus D100 operating panel. The ergonomic design was handed over to experts. The design of this new operating A danger alarm system is not alone in a panel incorporates not just standards and building.
System modernization Existing security alarm systems of the SM88 If, for example, you want to expand a system type with an SDN security dialog network by adding modern system components, the (with BMS or IMS control and indicating entire system can be retained. The key panels) - SIGMASYS can be updated kernels are upgraded from SM88 to D100 completely via Cerberus D100. The existing and the modern SIGMASYS system system remains unchanged; only the components can be connected.
Networking The networking of system technology is of however, is their particularly high degree of central importance for larger systems. The failure safety. The choice of a network arranged multifunctional danger alarm system D100 in “tree structures” is, therefore, practical for combines the particularly fail-safe (bi-directional) large surface networks. Failure safety is loop network from the SIGMASYS system guaranteed by redundant lines.
Technical data Power supply 115 V / 230 V AC +10% /–15%; 50 Hz or 60 Hz Power consumption 750 V A System voltage 24 V DC (22 V to 29 V) Max.
Fire & Security Products Siemens Gebäudesicherheit Issued by Siemens AG I BT DE FS SYS D-81379 Munich http://www.sbt.siemens.com www.sbt.siemens.de Order No. A24205-A334-B806 Edition 2/03 PA 02030.5 – EK 4500000000 © 2002 – 2003 Delivery subject to availability; right of technical modifications reserved. Printed in the Federal Republic of Germany on environment-friendly chlorine-free paper.
