Flyer

Application examples

Decentrally installed Room Control Box in office

A decentrally installed Room Control Box

for room functions

In an office with four workplaces, a window facade with

two windows, three lighting groups, two blinds, two

switched outlets, two radiators and two pushbuttons, the

room function controls are to be installed simply, flexibly

and decentralized. This is done by equipping a room auto-

mation box with an RL 513/23 switching actuator and two

RL 526/23 switching/dimming actuators for the two groups

of three lights, an RL 521/23 shutter blind actuator for the

two shutter blinds, two RL 512 switching actuators for two

outlets, an RL 510K23 thermo drive actuator for the two

radiators, and an RL 125 decentralized power supply for

additional island solutions. The room automation box is

thus occupied and controls the room with all required

functions.

Pushbutton 1Outlet OutletDoor

Lighting groups Lighting groups

1 2

5 6

Equipment for each Room Control Box:

1 x power supply RL 125/23

2 x switching actuator (1 x 16 A) RL 512/23 for two switched outlets

1 x switching actuator (3 x 6 A) RL 513/23 for the 2 x lighting groups 1 and 2

2 x switching/dimming actuator (2 x 6 A) RL 526/23 for the 4 x lighting groups 3, 4, 5, and 6

1 x shutter blind actuator (2 x 6 A) RL 521/23 for the two blinds on the two windows

1 x thermo drive actuator (2 x 1.5 A) RL 510K23 for the two radiators at the windows

A total of eight slots are thus occupied in the room automation box for the room controls.

Pushbutton 2Radiators

Blinds

Radiators

Blinds