Flyer
Technical data
Type Description
RS 525/23
Universal dimmer RS 525/23
• 1 x AC 230 V, 250 VA
• One output for switching and dimming resistive,
inductive or capacitive loads
• Automatic adjustment to leading-edge or trailing-edge
phase control, depending on the connected load type
• Electronic protection of the output against overload,
short-circuit and over-temperature
• Signaling of overload, short-circuit and over-temperature
via bus
• Selectable operating mode (normal mode,
one- or two-level timer mode, flashing)
• Adjustable On and Off delay
• Separately adjustable dimming time from 0% to 100%
for switching on/off and dimming brighter/darker
• Two dimming value objects, each with individually
adjustable dimming time from 0% to 100%
• Switching of an output on or off by dimming
brighter/darker
• Adjustable dimming value when switching on
• Immediate activation (jumping) or dimming
to a new dimming value
• Selectable additional status object switching
and/or status object dimming value
• Additional object for blocking/releasing the output
• Selectable sending of status objects on request and/or
automatically after a change
• Adjustable blocking time for sending status objects
after restart and bus voltage recovery
• Adjustable dimming value in the event of bus voltage
failure and recovery as well as mains voltage recovery
• Additional object “Night mode” for time-limited
switching on the output (and hence illumination)
at night
• Adjustable on period at night or in timer mode
• Selectable warning of imminent switching off by
dimming to 50% of the previous dimming value
during night mode or timer mode
• Integrated 8-bit scene control and incorporation
of each output in up to 8 scenes
• Adjustable dimming time for scene control
• Selectable function: operating hours count
with threshold monitoring of operating hours
• Selectable function: switching cycle count
with threshold monitoring of switching cycles
RL 526/23
NEW
RL 526D23 switching/dimming actuator
• 2 x AC 230 V, 6 A, 1…10 V
• One relay contact per output as the switching element
• Contact rated operating voltage AC 230 V
• Contact rated frequency: 50 / 60 Hz
• Contact rated current: 6 A
• Control voltage output DC 1 to 10 V (passive) per channel
for controlling dimmable electronic control gear
• Maintenance-free terminals for connecting and through-
wiring of untreated wires, single-stranded, finely-strand-
ed, and multi-stranded, 0.5 to 2.5 mm²
• Electronics operated via bus voltage
• Housing: plastic
• Dimensions (L x W x H): 86.5 x 47.8 x 36.2 mm
• Modular installation device for mounting in an AP 118
automation module box or AP 641 room automation box,
to be ordered separately
• Protection class: IP 20
• One switching and status object per output
• One dimming and status object per output
• Selectable operating mode: normal mode/timer
mode/flashing
• Adjustable On and Off delay, set value input object,
central switching
• Two logic operations (AND/OR/NOT AND/NOT
OR/EXCLUSIVE OR/FILTER/TRIGGER)
• Adjustable dimming time for switching and dimming
• Output switched on and off via dimming
• Adjustable dimming curves
• Adjustable maximum and minimum dimming value
• Adjustable transmission of status objects on request,
cyclically and/or after a change
• Adjustable status in the case of bus voltage failure
and dimming value after bus voltage recovery
• Night mode for time-limited switching of the output,
i.e. for lighting at night
• Adjustable On period at night and/or timer mode,
time limiting in timer mode, warning of switching off
• Manual override, always OFF, forced control, blocking
mode
• Operating hours count and switching-cycle count
with limit value monitoring
• Integrated 8-bit scene control and integration of
each output into up to 8 scenes
• Monitoring of device function
Modular installation system –
Room Control Box
8