User Manual

10
Third-switching conserves resources
Automatic notification of light
fixture failure eliminates the need
for inspections
User interfaces suited for every
need
Highlights
1. exchange
2. exchange 3. exchange
One-time exchange
of all light bulbs
Savings
T
hird-switching
w
ithout with
Costs of light
bulbs
B
asic costs of
r
eplacement
(
transport to site,
job order, ordering
light bulbs)
The longevity of light bulbs is increased thanks to the “third-switching”
m
ethod. Resources are conserved and costs reduced.
GAMMA instabus
provides immediate notification when a light fixture
i
s defective. Defective bulbs can be directly replaced, and inspections
a
re rendered unnecessary.
be controlled dependent on main usage
times and presence. When people are
present, lighting is switched to full
brightness in the respective area. When
nobody is present, lighting is reduced to
minimal brightness or, outside of main
usage times, switched off completely.
This cuts down on energy costs and in-
creases the light bulbs’ durability.
Third-switching
With GAMMA instabus
, a so-called
“third-switching” can be implemented:
A third of the light bulbs remains
switched on for a basic lighting level.
This third of the light bulbs, due to their
higher usage, will need to be replaced
before the other light bulbs. GAMMA
instabus
makes it possible to simply use
all the lights in such a way that they
rotate to cover the basic lighting level.
By evenly distributing the load, all light
bulbs can be replaced at the same time,
and the exchanges in the meantime will
not be necessary.
Tracking of operating hours
GAMMA instabus
tracks the operating
hours of each fixture and provides
notification when light bulbs are to be
replaced.
Notification of defective light bulbs
Notification is sent to building main-
tenance when a light fixture no longer
works.
Gates and barriers
Central controlling of gates and
barriers
Gates and barriers can be controlled
safely, comfortably and easily from a
control center.
Automatic exit driveways
Exit driveways can be controlled auto-
matically via motion sensors so that
only exiting and no unauthorized
entering is possible.
The right control for every task
Appropriate user interfaces for every
requirement
The best technology is useless if it is diffi-
cult to operate. GAMMA instabus
was con-
ceived and designed to be so user-friendly
so that all users can quickly master its
operation. Despite its impressive range of
functions, the system is very simple and
comfortable to use: from the familiar
switches, remote controls, operating dis-
plays, touch panels or via a central visuali-
zation PC.
The worldwide
standard for
home and buil-
ding control