User Manual

A constant light regulator that incorporates daylight only supplements as
m
uch artificial light as is necessary – less light closer to the window, more
l
ight closer to the wall.
5
Blinds with daylight steering
Highly modern blinds with daylight steering
can be integrated into these controls.
Constant light regulation
A constant light regulation only permits the
amount of artificial light actually needed in
the room. Of course you can always manu-
ally adjust the light to suit your needs.
Lighting according to presence
If an office or conference room is not in use,
the light is switched off altogether. The
lighting can be controlled by presence sen-
sors, by being connected to an entrance
control or a timer, or manually. Outside of
core usage times, hallways and bathrooms
in particular are only illuminated when in
use. Within the core usage times, a variable
minimum brightness is maintained when
nobody is present. Thus optimum energy
savings can be attained, while increasing
light bulb longevitiy.
Heating, cooling, and ventilation
according to need
Heating and cooling costs are a major factor
in a building’s operating costs. GAMMA
instabus
reduces these costs significantly,
by only fully heating, cooling or ventilating
offices and conference rooms when they are
actually needed. The room temperature can
be controlled by motion sensors, core usage
times, by room-based utilization plans or
manually.
Reduction of heating in case of open
window
As long as windows are open, the heating
is automatically lowered to frost protection
level, and cooling and ventilation reduced
or deactivated altogether.
"Central off" of heating, cooling, and
ventilation
At night, a “central off” setting can reduce
heating, cooling and ventilation to protec-
tion mode.
Usage changes without rewiring
The economic efficiency of GAMMA
instabus
becomes clear when we look
at what happens when usage conditions
change. When room sizes are altered,
organizational changes made, or new
equipment installed, a costly rewiring
won’t be necessary. Changing the para-
meters is all that’s required in most cases,
and functions and connections are simply
reassigned. Expensive vacancy times
caused by complex modifications are
thus reduced significantly.
New functionality easily added
Should an expansion of functions become
necessary down the line, this is possible
without a hitch thanks to the decentralized
concept of GAMMA instabus
. An additional
push-button control, for example, only
requires a bus lead for it to be able to
operate any room function you require.
More efficiency in building manage-
ment
Cost-effective use of light and shade
Room temperature based on use
Flexible adaptation to changed room
usage
Highlights