Brochure

Modular installation system, room control box
Room control box
Modules
298
Siemens Switzerland Ltd www.siemens.com/gamma 2021
Smart Infrastructure
9
Thermo Drive Actuator, 2 x 1.5 A, AC 24...230 V / DC 24 V
 2 switching outputs for control of electro-thermal drives for heating radiator and cooling ceiling valves
 Per output up to 4 connected electro-thermal drives with in total up to 1.5 A in the on-state and up to
58 W power consumption when switched on
 One relay contact per output as switching element
 Rated contact operating voltage AC 24...230 V or DC 24 V
 Rated contact frequency: 50/60 Hz
 Contact rated current according to DIN EN 60669-1: 1.5 A (resistive load)
 Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-
core conductors, 0.5...2.5 mm
2
 With bus connection module
 Bus-powered electronics
 Integrated bus coupling unit, bus connection via bus terminal
 Modular installation device for mounting in AP 118 automation module box or AP 641 room control
box
 Selectable control via switching commands (on-off control) or via contol commands in percent
(continuous control)
 Conversion of control commands in percent into pulse width modulated (PWM) switching commands
 Additional functions for avoiding calcification of a valve and forced position as well as a status object
per output
 Status object as an optional addition for each output
 Selectable switching state for each output on bus voltage failure and recovery
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System - Room control box - Module boxes.
Data sheet
A6V10532363
Rated voltage
AC 24 V
Rated current
1.5 A
Number of channels
2
Relay outputs, number
2
Triac outputs, number
0
Dimensions (W x H x D)
50,2 x 48,8 x 35,5 mm
RS 510K23
Stock no.
Product no.
5WG1510-2KB23
RS 510K23