Brochure
Modular installation system, room control box
Junction box (UL/NEMA) devices
305
Siemens Switzerland Ltd www.siemens.com/gamma 2021
Smart Infrastructure
9
Shutter Blind Actuator, 1 x AC 120 V, 6 A
1 channel
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with
auto-calibration of the travel time from one limit switch to the other
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
For control of sun protection, door or window drive with a motor for AC 120 V and electromechanical
or electronic limit switches per actuator channel
Relay contacts rated for nominal voltage AC 120 V, 6 A (resistive load)
As built-in device with 1/2 inch thread connection for mounting to or in a UL/NEMA Junction Box with
feedthrough of the function wires through the 1/2 inch threaded connector
Configurable behavior in the event of a bus voltage failure/recovery
Automatic mode for sunlight tracking control
Manual and standard mode
Status: Transmitting status per channel, status position of sun protection, 8-bit, status position of slats,
8-bit
Integrated 1-bit/8-bit scene control
8 scenes to be integrated per channel
Travel lock (e. g. for cleaning the outer shutter/blinds)
Separate raising/lowering protection
Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active
Individual configuration of actuator channels
Adaptation of objects and functions to drive type
Suitable for integration in a sunlight tracking control system
End position detection
Using position data (8-bit value) for sun protection control (up/down) and slat control (open/closed)
Data sheet
A6V11786009
Dimensions (W x H x D)
70 x 90 x 44,6 mm
JB 520C23
Stock no.
Product no.
5WG1520-4CB23
JB 520C23