Brochure

Gateways, interface converters
KNX/USB
324
Siemens Switzerland Ltd www.siemens.com/gamma 2021
Smart Infrastructure
10
USB Interface
Compatible with USB 2.0 and USB 3.0
For isolated access to the bus line over the built-in USB socket (type B)
For connection of a PC for addressing, parameterization, visualization, logging and diagnosis of bus
devices
Access to all bus devices in the whole bus system
Support of bus telegrams with up to 64 bytes length
Power supply over the bus line and over USB through the connected PC
Integrated bus coupling unit, bus connection over bus terminal
Transmission at USB 2.0 speed (max. 12 Mbit/s) between PC and USB interface
Modular installation device for mounting on TH35 DIN EN 60715 mounting rail
Data sheet
A6V11535346
Dimension width (1 MW = 18 mm)
1 MW
N 148/12
Stock no.
Product no.
5WG1148-1AB12
N 148/12
USB - KNX Service interface
The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)
With the respective PC software, the interfaces allows to commission and service devices with KNX
communication, e.g. from the following ranges:
Synco™ 700 controllers and room devices
KNX room thermostats RDF..., RDG..
Individual room controllers RXB..
Synco™ living central apartment units QAX9...
Desigo TRA
GAMMA devices
Data sheet
A6V10438951
Degree of protection
IP20
OCI702
Stock no.
Product no.
S55800-Y101
OCI702